Description
HYDRAsub HSM125-ES Membrane are designed for MBR operations for the purposes purifying effluent that consists of significant biological problems, resulting from sewage or industrial sources. Hollow fiber diaphragms for bioreactor membrane processes in treating wastewater.
Models
| HYDRAsub® – MBR | HSM125-ES | |
|
Module |
Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight: |
Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.4 μm 40 (25 m² each) 5 (25m²each) 1345 ft2 (125m²) (2)-2” MNPT (2)-11/2”MNPT (2)-to fit 2.5” pipes 352 lbs (160 kg) 502 lbs (227 kg) |
|
Operating |
Maximum Trans Membrane Pressure(Vacuum): Maximum Backwash Pressure: Maximum Instantaneous Chlorine Concentration: Maximum Chlorine Tolerance: MLSS Range: Operating Temperature Range: Feed Water pH Range: Cleaning pH Range: Operating Mode: |
-6 psig (-0.41 bar) 2 psig (0.14 bar) 5,000 ppma 742,000 ppm-hrsb 8,000-12,000 mg/Lc 41-104°F (5 -40°C) 6.0-8.0 1.0 – 11.0 Outside to Inside |
|
Typical |
Operating Filtrate Flux†: Peak Operating Flux†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: OCIP Chemicals: |
4-20 gfd (7-34 lmh) |
Features
- Very high flux
- CAPEX savings
- Lower footprint
- PVDF fiber
- Reliable and robust product
Applications
- Effluent (sewage or industrial source)
- Municipal applications
