Water Treatment Systems – Aqua Components

Large Water Softeners with Clack Valve SF-300C

aqua@2025 — Thu, 13 Mar 2025 13:57:20 +0000

The Aqua Components large water softener systems offer a robust and efficient solution for reducing mineral scale, soap usage, and energy consumption in the plumbing and other water-using equipment for commercial, light industrial, and institutional facilities. The corrosion-resistant fiberglass-reinforced polyethylene tank design and reliable top mounted valve will provide many years of reliable service.

All large water softeners include an appropriately sized mineral tank, a commercial brine tank with brine tubing and connectors, a distributor tube, an appropriate amount of gravel and cross-link 8% resin, and a control valve of your choice. In addition, all systems are new with factory warranties.

These large softeners require periodic regeneration to reactivate the resin and replenish its salt concentration. This is accomplished by doing a brine draw from the brine tank and running it through the tank for a set period of time. During this phase, the resin will release its hardness and exchange it with salt from the brine tank. Because regeneration generally occurs at higher flow rates than those seen in service, often a proper regeneration flow rate is not possible because the systems are designed for required service flow rates.

Aqua Components large water softeners treat water by removing hardness using resin. The resin replaces the hardness in the water with salt, which is regenerated periodically.

Models

Operation Specifications:
Electrical supply: 120VAC/1Ph/60Hz 2 Amp	Operating temperature: 35 – 100°F (2 – 38°C)	Operating pressure: 25 – 125 psi (1.73 – 8.6 bar)

Model #	Exchange Capacity (Grains)	Flow Rates (GPM)			Pipe Size	Resin Qty. (Ft³)	Tank Size (inch)		Salt Storage (lbs)	Shipping Weight (lbs)
Model #	Exchange Capacity (Grains)	Avg.	Peak	Bck-Wash	Pipe Size	Resin Qty. (Ft³)	Softener	Brine	Salt Storage (lbs)	Shipping Weight (lbs)
100C930S	30,000	9.5	17	2	1″	1	9 X 48	18 X 40	450	100
100C1045	45,000	10	17	3″	1″	1.5	10X54	18X40	450	140
100C1260S	60,000	18	24	4	1″	2	12X52	18X40	450	176
150C1260S		24	37		1.5″					182
200C1260S		28	49		2″					196
100C1375S	75,000	18	24	5	1″	2.5	13X54	18X40	450	215
150C1375S		29	40		1.5″					221
200C1375S		37	52		2″					235
125C1490S	90,000	19	26	6	1.25″	3	14X65	24X50	900	251
150C1490S		27	40		1.5″					257
200C1490S		37	54		2″					271
125C16120S	120,000	20	27	7	1.25″	4	16X65	24X50	900	310
150C16120S		33	45		1.5″					316
200C16120S		47	64		2″					330
125C18150S	150,000	21	28	9	1.25″	5	18X65	24X50	900	393
150C18150S		37	49		1.5″					399
200C18150S		56	78		2″					413
125C21210S	210000	21	28	12	1.25″	7	21X62	24X50	900	543
150C21210S		40	54		1.5″					549
200C21210S		63	81		2″					563
150C24300S	300,000	42	56	16	1.5″	10	24X72	24X50	900	874
200C24300S		74	97		2″					888
300C24300S		107	170		3″					948
150C30450S	450,000	44	58	25	1.5″	15	30X72	30X50	1,400	1,314
200C30450S		84	105		2″					1,328
300C30450S		158	112		3″					1,388
200C36600S	600,000	85	105	35	2″	20	36X72	30X50	1,400	1,716
300C36600S	600,000	185	150	35	3″	20	36X72	30X50	1,400	1,770
200C42900S	900,000	90	113	48	2″	30	42X72	50X60	4,500	2,914
300C42900S	900,000	200	268	48	3″	30	42X72	50X60	4,500	2,968
200C481200S	1,200,000	95	116	63	2″	40	48X72	50X60	4,500	3,466
300C481200S	1,200,000	213	280	63	3″	40	48X72	50X60	4,500	3,520
300C631800S	1,800,000	220	300	100	3″	60	63X86	50X60	4,500	5,040
For more information, please view/download our “Data Sheet”

Features

Standard Features:	Available Options:
7 day time clock Premium fiberglass mineral tank Automatic motor driven control valve with fully adjustable regeneration cycles Self-adjusting backwash controller Flow controller to limit backwash flow Timed brine refill control High exchange capacity polystyrene resin Rigid polyethylene brine tank with safety brine valve, dust cover, and tubing	12 day time clock Meter control Epoxy lined or galvanized steel tanks 240V/1Ph/50Hz power supply Additional micro switch for interlock Inlet / Outlet sample valves Inlet / Outlet pressure gauges Twin or Duplex systems Diaphragm valves ASME coded tanks Stainless steel tanks Interlock wiring Hot water applications Nitrate removal systems Vacuum breaker

Applications

Aqua Components water softeners are commonly used for industrial, and commercial applications such as:

Water Recycling & Reuse
Power and Energy
Mining
Groundwater Remediation
Food & Drinking Water
Rain Water
Irrigation
Enviornmental Conservation
Dust Supression
Boiler and Feed (Ultrapure) Water

Docs

Commercial Water Softeners with Clack Valve Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Water Softener SF-500F with Fleck Valve

aqua@2025 — Thu, 13 Mar 2025 13:57:20 +0000

Aqua Components supplies Fleck water softener systems that filter mineral water to our million commercial clients around the world. Mineral water is excellent for you, but it might shorten the life of your equipment by many years. Washing machines, equipment, and heat exchangers all have pipelines, which are similar to blood arteries in the human body. Equipment are compelled to perform harder if they become clogged with limescale from hard water minerals. Their productivity decreases, and before you know it, you’re assisting the maintenance worker save for a vacation.

For this reason, a Fleck water softener is the most efficient and cost-effective water treatment solution to utilize in order to prevent scale build up from occurring. Unlike other water filtration processes, water softeners only remove the minerals that cause water hardness.

At Aqua Components, we design all of our water softeners with Fleck valves with the highest quality of materials. We use high grade FDP for our tanks and a control valve of your choice for your convenience. Aqua Components exchange resin is among the best in the industry in terms of economical value and quality. With an advanced controller with customizable backwash settings, a fleck water softener from Aqua Components couldn’t possibly be more convenient.

Fiberglass Tank – Top Mounted Valve

A Fleck water softener is designed specifically to remove high levels of dissolved solids that create hard water conditions, principally calcium and magnesium. These softeners utilize Fleck control valves to provide an economical solution for treating scale build-up in home appliances like water heaters, washing machines, coffee makers, dish washers, and humidifiers. They also eliminate the soap scum build-up in sinks and showers.

Models

Operating Specifications:
Electrical supply: 120VAC, 1-Phase, 60 Hz, 2 Amp	Operating pressure: 30 – 125 psi (2 – 8.5 bar)	Operating temperature: 2-38°C (35-100°F)

Model#	Exchange Capacity @ 15lbs/cu.ft. (grains)	Flow Rates (GPM)			Valve & Pipe Size	Resin Qty. (ft³)	Tank Size (inch)		Salt Capacity (lbs)	Shipping Weight (lbs)
		Service		Back-Wash			Tank Size (inch)
		Avg	Peak	Back-Wash			Softener	Brine
5800 Fleck Valve
58F930	30,000	9.5	30	2	3/4″	1	9X48	18X33	375	105
58F1045	45,000	9.5	30	3	3/4″	1.5	10X54	18X33	375	145
58F1260	60,000	10	30	4	3/4″	2	12X52	18X40	450	190
58F1375	75,000	11	30	5	3/4″	2.5	13X54	18X40	450	200
58F1490	90,000	12	30	6	1″	3	14X65	24X50	900	295
58F16120	120,000	14	30	7	1″	4	16X65	24X50	900	345
For more information, please view/download our “Data Sheet”

Features

Standard Features:	Avaliable Options:
Meter initiated regenration Premium fiberglass mineral tank Fully automatic motorized piston control valve Self-adjusting backwash controller Flow controller to limit backwash flow Timed brine refill control High exchange capacity polystyrene resin Brine tank with safety brine valve, dust cover, and tubing	Standard or extended range meter ASME coded tanks Epoxy lined or galvanized steel tanks 240V/1Ph/50Hz power supply Additional micro switch for interlock Inline hardness monitor Stainless steel of PVC jacket 3/4”, 1” or 1-1/4” bypass Salt grid plate Turbulator Mixing valve

Applications

The applications for a residential water softener by Aqua Components include:
Water Recycling & Reuse Power and Energy Groundwater Remediation Food and Drink Water	Rain Water Boiler and Feed Water Enviornmental Conservation Disaster Relief

Docs

Water Softener with Fleck Valve Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Twin Tank Water Softener SF-900F with Fleck Valve

aqua@2025 — Thu, 13 Mar 2025 13:57:20 +0000

The SF-900F Series Twin Water Softener System has a greater commercial operating capacity and takes up less space than other systems on the market. The combination of the two mineral tanks and the larger brine tank provide you with 24 hours of continuous soft water. By setting the capacity dial, based on the water hardness in your area, the unit monitors the usage of soft water and only regenerates when needed.

Aqua Components offers water softeners and water softener systems that can provide clean water for your commercial applications. We have several satisfied clients all around the world that use our water softener solutions.

Models

Operating Specifications:
Electrical: 120VAC, 1-Phase, 60 Hz, 2 Amp	Operating temperature: 2-38°C (35-100°F)	Operating pressure: 30 – 125 psi (2 – 8.5 bar)

Model #	Maximum Exchange Capacity (Grains)	Flow Rate (GPM)			Valve & Pipe size	RESIN Qty. (Ft³)	Tank Size (In)		Salt Capacity (lbs)	Shipping Weight (lbs)
		Service Flow Rates (GPM)		Back-Wash			Tank Size (In)
		Average	Peak	Back-Wash			Softener	Brine
9100 Control Valves
91F930	30,000	14	18	2	3/4″	2X1.0	9 X 48	18 X 33	375	211
91F1045	45,000	15	19	3	3/4″	2X1.5	10 X 54	18 X 33	375	281
91F1260	60,000	16	21	4	3/4″	2X2.0	12 X 52	18 X 40	450	343
91F1375	75,000	16	21	5	3/4″	2X2.5	13 X 54	18 X 40	450	401
91F1490	90,000	17	22	6	1″	2X3.0	14 X 65	24 X 50	900	513
91F16120	120,000	18	23	7	1″	2X4.0	16 X 65	24 X 50	900	620
9500 Control Valves
95F1260	60,000	28	39	4	1-1/2″	2×2.0	12 X 52	18 X 40	450	415
95F1375	75,000	28	39	4	1-1/2″	2×2.5	13 X 54	18 X 40	450	473
95F1490	90,000	31	41	5	1-1/2″	2×3.0	14 X 65	24 X 50	900	585
95F16120	120,000	34	46	7	1-1/2″	2×4.0	16 X 65	24 X 50	900	704
95F18150	150,000	34	46	7	1-1/2″	2×5.0	18 X 65	24 X 50	900	920
95F22210	210,000	39	49	12	1-1/2″	2×7.0	21 X 62	24 X 50	900	1,170
95F24300	300,000	39	49	15	1-1/2″	2×10	24 X 72	24 X 50	900	1,760
For more information, please view/download our “Data Sheet”

Features

Standard Features:	Available Options:
Premium fiberglass mineral tank Fully automatic motorized piston control valve, 5-cycle control Self-adjusting backwash controller Flow controller to limit backwash flow Timed brine refill control High exchange capacity polystyrene resin Rigid polyethylene brine tank with safety brine valve, dust cover, and tubing No hard water bypass	Extended range meter ASME coded tanks Epoxy lined or galvanized steel tanks 240V/1Ph/50Hz power supply Additional micro switch for interlock Inline hardness monitor Nickel plating for brass control valves Stainless steel or PVC jacket 3/4”, 1” or 1-1/2” bypass Salt grid plate Turbulator Mixing valve

Applications

Aqua Components water softeners are commonly used for industrial, and commercial applications such as:
Household water Protection of heat transfer elements and spray nozzles Cooling tower make-up water Groundwater remediation	Large laundry for hotels and restaurant facilities Boiler & reactor feed and make-up water Wastewater re-use High purity water	Contact process water Pre-treatment for reverse osmosis or ion exchange systems Spot free rinse water

Docs

Twin Tank Water Softener with Fleck Valve Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Industrial Steel Tank Water Media Filter MF-1000

aqua@2025 — Thu, 13 Mar 2025 13:57:20 +0000

Aqua Components LLC, is an industrial water filter manufacturer, including being one of the leading producers of pressure filters.

Why a pressure filter? Aqua Components pressure filters can be used in a variety of service conditions including, but not limited to industrial, municipal, and institutional applications. For problems with iron, suspended particles, sediment, turbidity, unpleasant tastes and odors, unwanted color, or the common contaminants of surface water, Aqua Components pressure filters are the ideal purification solution.

Filter Media Types

Manganese Greensand media is treated siliceous material for treating water containing iron, manganese and hydrogen sulfide through oxidation.
Anthracite is recommended as a filter medium where additional silica in the water is not desirable and can remove lighter weight turbidity. Anthracite is typically used in applications where silica pick-up is undesireable.
ProSand is based on a rare natural mineral. Its unique properties radically improve the performance and cost of media filtration.
Calcite media is specially graded calcium carbonate compound for neutralizing acid with consistent dissolving rates for water treatment.
Filter AG is non-hydrous silicon dioxide with many advantages for the reduction of suspended matter.
Activated carbon medium is used to remove taste, odor, organic contaminants, and chlorine as well as being used in many drinking water applications.
Sand is the most common filter media. Generally, fine mesh sand is coupled with a course grain support bed to remove suspended solids and turbidity. Graded in various ranges, Aqua Components sand can be used as filtration medium or underbedding depending on particle size and application.
Gravel has a highly spherical shape that promotes good flow and even distribution in support beds.
Multimedia is required when maximum quality water is required and unwanted sediment is too small to be removed by standard media. It consists of multiple layers of increasing grain size to remove sediment as small as 10 microns.

Advantages of Multimedia Filtration

Relatively inexpensive, no recurring cost of consumables
Proven process and most tested forms of water treatment
Systems are robust with no moving parts inside the tanks
Modular control valves designed for operational flexibility
Filtration media is inexpensive and long-lasting
Easily cleaned and maintained
Resistant to fouling (clogging)

Multimedia Filtration Operating Cycles

Service Cycle

Water flows downward through the media while solids accumulate in the media bed. The purified water passes through to downstream processes.

Backwash Cycle

When the filter begins to clog or when the head loss (pressure drop) through the bed increases, flow rates are reduced. To prevent degradation of water quality, the flow is reversed. This is directed by the control valve(s) to drain, carrying with it, the particulate matter that has built up during service. The required flow is specific to the media and is essential to proper cleaning of the media bed. For media filters, the backwash flow is always higher than the service flow rate.

Models

Model #		Flow Rate						Tank Size D”xH”	Media Qty (ft³)	Pipe Size		Approx. Weight (lbs)
Model #		Average		Peak		Backwash				Pipe Size
Automatic	Manual	GPM	M³/H	GPM	M³/H	GPM	M³/H			Serv.	Drain
Multi Layers Filters: Anthracite, Sand and Gravel (Turbidity Removal)
MLF20-A	MLF20-M	22	5.0	44	9.9	33	7.4	20X54	6	1-1/2″	1-1/2″	823
MLF24-A	MLF24-M	31	7.1	63	14.3	47	10.7	24×54	8.5	1-1/2″	1-1/2″	1,200
MLF30-A	MLF30-M	49	11.2	98	22.3	74	16.7	30×54	13	2″	2″	1,800
MLF36-A	MLF36-M	71	16.1	141	32.1	106	24.1	36×60	19	2″	2″	2,684
MLF42-A	MLF42-M	96	21.9	192	43.7	144	32.8	42×60	26	3″	3″	3,806
MLF48-A	MLF48-M	126	28.6	251	57.1	189	42.9	48×60	34	3″	3″	4,913
MLF54-A	MLF54-M	159	36.1	318	72.3	239	54.2	54×60	43	4″	4″	6,565
MLF60-A	MLF60-M	196	44.6	393	89.2	294	66.9	60×60	53	4″	4″	8,455
MLF66-A	MLF66-M	238	54.0	475	108.0	356	81.0	66×60	64	4″	4″	10,095
MLF72-A	MLF72-M	283	64.3	565	128.5	424	96.4	72×60	76	4″	4″	12,615
MLF78-A	MLF78-M	332	75.4	664	150.8	498	113.1	78×60	89	6″	6″	14,320
MLF84-A	MLF84-M	385	87.5	770	174.9	577	131.2	84×60	103	6″	6″	17,280
Turbidex Filters: (Turbidity Removal)
TXF20-A	TXF20-M	22	5.0	44	9.9	33	7.4	20X54	6	1-1/2″	1-1/2″	688
TXF24-A	TXF24-M	31	7.1	63	14.3	47	10.7	24×54	8.5	1-1/2″	1-1/2″	969
TXF30-A	TXF30-M	49	11.2	98	22.3	74	16.7	30×54	13	2″	2″	1,438
TXF36-A	TXF36-M	71	16.1	141	32.1	106	24.1	36×60	19	2″	2″	2,156
TXF42-A	TXF42-M	96	21.9	192	43.7	144	32.8	42×60	26	3″	3″	3,081
TXF48-A	TXF48-M	126	28.6	251	57.1	189	42.9	48×60	34	3″	3″	3,988
TXF54-A	TXF54-M	159	36.1	318	72.3	239	54.2	54×60	43	4″	4″	5,438
TXF60-A	TXF60-M	196	44.6	393	89.2	294	66.9	60×60	53	4″	4″	7,063
TXF66-A	TXF66-M	238	54.0	475	108.0	356	81.0	66×60	64	4″	4″	8,375
TXF72-A	TXF72-M	283	64.3	565	128.5	424	96.4	72×60	76	4″	4″	10,625
TXF78-A	TXF78-M	332	75.4	664	150.8	498	113.1	78×60	89	6″	6″	11,938
TXF84-A	TXF84-M	385	87.5	770	174.9	577	131.2	84×60	103	6″	6″	14,563
AG Filters: Non Hydrous Silicon Dioxide (Turbidity Removal)
AGF20-A	AGF20-M	11	2.5	22	5.0	22	5.0	20X54	6	1-1/2″	1-1/2″	500
AGF24-A	AGF24-M	16	3.6	31	7.1	31	7.1	24×54	8.5	1-1/2″	1-1/2″	703
AGF30-A	AGF30-M	25	5.6	49	11.2	49	11.2	30×54	13	2″	2″	1,031
AGF36-A	AGF36-M	35	8.0	71	16.1	71	16.1	36×60	19	2″	2″	1,563
AGF42-A	AGF42-M	48	10.9	96	21.9	96	21.9	42×60	26	3″	3″	2,269
AGF48-A	AGF48-M	63	14.3	126	28.6	126	28.6	48×60	34	3″	3″	2,925
AGF54-A	AGF54-M	80	18.1	159	36.1	159	36.1	54×60	43	4″	4″	4,094
AGF60-A	AGF60-M	98	22.3	196	44.6	196	44.6	60×60	53	4″	4″	5,406
AGF66-A	AGF66-M	119	27.0	238	54.0	238	54.0	66×60	64	4″	4″	6,375
AGF72-A	AGF72-M	141	32.1	283	64.3	283	64.3	72×60	76	4″	4″	8,250
AGF78-A	AGF78-M	166	37.7	332	75.4	332	75.4	78×60	89	6″	6″	9,156
AGF84-A	AGF84-M	192	43.7	385	87.5	385	87.5	84×60	103	6″	6″	11,344
Activated Carbon Filters: Granular Form with High Degree of Porosity (Taste, Odor and Color Removal)
ACF20-A	ACF20-M	11	2.5	26	5.9	26	5.9	20X54	6	1-1/2″	1-1/2″	519
ACF24-A	ACF24-M	16	3.6	38	8.6	38	8.6	24×54	8.5	1-1/2″	1-1/2″	730
ACF30-A	ACF30-M	25	5.6	59	13.4	59	13.4	30×54	13	2″	2″	1,072
ACF36-A	ACF36-M	35	8.0	85	19.3	85	19.3	36×60	19	2″	2″	1,622
ACF42-A	ACF42-M	48	10.9	115	26.2	115	26.2	42×60	26	3″	3″	2,350
ACF48-A	ACF48-M	63	14.3	151	34.3	151	34.3	48×60	34	3″	3″	3,031
ACF54-A	ACF54-M	80	18.1	191	43.4	191	43.4	54×60	43	4″	4″	4,228
ACF60-A	ACF60-M	98	22.3	236	53.5	236	53.5	60×60	53	4″	4″	5,572
ACF66-A	ACF66-M	119	27.0	285	64.8	285	64.8	66×60	64	4″	4″	6,575
ACF72-A	ACF72-M	141	32.1	339	77.1	339	77.1	72×60	76	4″	4″	8,488
ACF78-A	ACF78-M	166	37.7	398	90.5	398	90.5	78×60	89	6″	6″	9,434
ACF84-A	ACF84-M	192	43.7	462	104.9	462	104.9	84×60	103	6″	6″	11,666

Model #		Flow Rate						Tank Size D”xH”	Media Qty (ft³)	Pipe Size		Approx. Weight (lbs)
Model #		Average		Peak		Backwash				Pipe Size
Automatic	Manual	GPM	M³/H	GPM	M³/H	GPM	M³/H			Serv.	Drain
Greensand PLUS Filters: Enriched Quality with High Catalytic Capacity (Fe, Mn and H₂S Reduction)
GSF20-A	GSF20-M	11	2.5	26	5.9	26	5.9	20X54	6	1-1/2″	1-1/2″	1,648
GSF24-A	GSF24-M	16	3.6	38	8.6	38	8.6	24×54	8.5	1-1/2″	1-1/2″	2,329
GSF30-A	GSF30-M	25	5.6	59	13.4	59	13.4	30×54	13	2″	2″	3,518
GSF36-A	GSF36-M	35	8.0	85	19.3	85	19.3	36×60	19	2″	2″	5,196
GSF42-A	GSF42-M	48	10.9	115	26.2	115	26.2	42×60	26	3″	3″	7,241
GSF48-A	GSF48-M	63	14.3	151	34.3	151	34.3	48×60	34	3″	3″	9,428
GSF54-A	GSF54-M	80	18.1	191	43.4	191	43.4	54×60	43	4″	4″	12,318
GSF60-A	GSF60-M	98	22.3	236	53.5	236	53.5	60×60	53	4″	4″	15,543
GSF66-A	GSF66-M	119	27.0	285	64.8	285	64.8	66×60	64	4″	4″	18,615
GSF72-A	GSF72-M	141	32.1	339	77.1	339	77.1	72×60	76	4″	4″	22,785
GSF78-A	GSF78-M	166	37.7	398	90.5	398	90.5	78×60	89	6″	6″	26,178
GSF84-A	GSF84-M	192	43.7	462	104.9	462	104.9	84×60	103	6″	6″	31,043
Birm Filters: Insoluble Catalyst (Fe and Mn Reduction)
BRF20-A	BRF20-M	11	2.5	26	5.9	26	5.9	20X54	6	1-1/2″	1-1/2″	643
BRF24-A	BRF24-M	16	3.6	38	8.6	38	8.6	24×54	8.5	1-1/2″	1-1/2″	905
BRF30-A	BRF30-M	25	5.6	59	13.4	59	13.4	30×54	13	2″	2″	1,340
BRF36-A	BRF36-M	35	8.0	85	19.3	85	19.3	36×60	19	2″	2″	2,014
BRF42-A	BRF42-M	48	10.9	115	26.2	115	26.2	42×60	26	3″	3″	2,886
BRF48-A	BRF48-M	63	14.3	151	34.3	151	34.3	48×60	34	3″	3″	3,733
BRF54-A	BRF54-M	80	18.1	191	43.4	191	43.4	54×60	43	4″	4″	5,115
BRF60-A	BRF60-M	98	22.3	236	53.5	236	53.5	60×60	53	4″	4″	6,665
BRF66-A	BRF66-M	119	27.0	285	64.8	285	64.8	66×60	64	4″	4″	7,895
BRF72-A	BRF72-M	141	32.1	339	77.1	339	77.1	72×60	76	4″	4″	10,055
BRF78-A	BRF78-M	166	37.7	398	90.5	398	90.5	78×60	89	6″	6″	11,270
BRF84-A	BRF84-M	192	43.7	462	104.9	462	104.9	84×60	103	6″	6″	13,790
Calcite Filters: (pH Neutralization)
CTF20-A	CTF20-M	11	2.5	26	5.9	26	5.9	20X54	6	1-1/2″	1-1/2″	1,063
CTF24-A	CTF24-M	16	3.6	38	8.6	38	8.6	24×54	8.5	1-1/2″	1-1/2″	1,500
CTF30-A	CTF30-M	25	5.6	59	13.4	59	13.4	30×54	13	2″	2″	2,250
CTF36-A	CTF36-M	35	8.0	85	19.3	85	19.3	36×60	19	2″	2″	3,344
CTF42-A	CTF42-M	48	10.9	115	26.2	115	26.2	42×60	26	3″	3″	4,706
CTF48-A	CTF48-M	63	14.3	151	34.3	151	34.3	48×60	34	3″	3″	6,113
CTF54-A	CTF54-M	80	18.1	191	43.4	191	43.4	54×60	43	4″	4″	8,125
CTF60-A	CTF60-M	98	22.3	236	53.5	236	53.5	60×60	53	4″	4″	10,375
CTF66-A	CTF66-M	119	27.0	285	64.8	285	64.8	66×60	64	4″	4″	12,375
CTF72-A	CTF72-M	141	32.1	339	77.1	339	77.1	72×60	76	4″	4″	15,375
CTF78-A	CTF78-M	166	37.7	398	90.5	398	90.5	78×60	89	6″	6″	17,500
CTF84-A	CTF84-M	192	43.7	462	104.9	462	104.9	84×60	103	6″	6″	21,000

Features

Standard Features:

Available Options:

Carbon steel tank, rated at 100 PSI
Epoxy coated interior and primed exterior
1/4″ tubing between stager and valves
Electrical supply: 120V/1Ph/60Hz
Schedule 80 PVC face piping
PP/PVC 80 internal piping and distributor
Primer blue coating on tank exterior
Top loading port or manway
1.5”-2” Noryl diaphragm valves or butterfly
valves for 3’’ or larger
Digital stager for filters using diaphragm
valves or PLC for butterfly valves
Air source not included
Vent and drain ports
High quality media

Duplex systems
Tanks according to ASME code
Stainless steel tanks
Fiberglass tanks
240V/1ph/50Hz power supply
Vacuum breaker
Pressure relief valve
Inlet/outlet sample valves
Inlet/outlet pressure gauges
Differential pressure switch and gauge
Auxiliary switch for backwash pump start
Stainless steel internal piping and distributor
Stainless steel face piping

Applications

The ideal applications for a Media Filter include:
Water features (fountains, etc.) Wastewater Irrigation water Potable (drinking) water	Storm water Suspended solids reduction Iron and manganese removal Reclaimed Water Treatment	Cooling water Swimming pool water Industrial process water Water Recycling And Reuse

Docs

Industrial Steel Tank Water Media Filter Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Multi-Cartridge Stainless Steel Filter Housings SSC Series

aqua@2025 — Thu, 13 Mar 2025 13:57:19 +0000

Stainless Steel Cartridge Filter Housings SSC Series are ideal for most industrial/commercial applications. SSC housings easily accept PA Cartridges. With our wide range of models, options, and filter cartridges, these units can easily meet most requirements, such as: filtration of particulates, chlorine taste and odor, and for inhibition of scale and corrosion.

Models

For more information, please view/download our “Data Sheet”
SSC-I Series (Industrial)
Model #	Cartridges Requirement	Pipe Size (Flange)	Max. Flow Rate (GPM)	Drain Size (NPT)	Dimensions (W”xH”)	Shipping Weight (lbs)
SSC-24	(6) of 40”	3”	144	1/2”	14.5×57	86
SSC-28	(7) of 40”	3”	168	1/2”	14.5×57	86
SSC-36	(9) of 40”	3”	216	1/2”	16.5×60	92
SSC-48	(12) of 40”	4”	288	1/2”	20.5×60	100
SSC-66	(22) of 30”	4”	396	1/2”	20.5×53	165
SSC-88	(22) of 40”	6”	528	1/2”	22.5×63	175
SSC-108	(27) of 40”	6”	660	1/2”	24.5×60	205
SSC-144	(36) of 40”	6”	720	1/2”	31.5×83.5	225
SSC-168	(42) of 40”	6”	1,008	1/2”	31.5×83.5	250
SSC-220	(55) of 40”	8”	1,320	1/2”	31.5×83.5	275
SSC-244	(61) of 40”	8”	1,464	1/2”	31.5×83.5	300
SSC-292	(73) of 40”	8”	1,752	1/2”	38×83.5	310
SSC-390	(98) of 40”	10”	2,340	1/2”	38×83.5	325
SSC-480	(120) of 40”	10”	2,880	1/2”	40×83.5	335
SSC-600	(150) of 40”	10”	3,000	1/2”	44×83.5	345
SSC-C Series (Commercial)
Model #	Cartridges Requirement	Pipe Size (Flange)	Max. Flow Rate (GPM)	Drain Size (NPT)	Dimensions (W”xH”)	Shipping Weight (lbs)
SSC-4	(4) of 10″	2″	24	1/2″	10.5×21	25
SSC-5	(5) of 10″	2″	30	1/2″	10.5×21	27
SSC-8	(4) of 20″	2″	48	1/2″	10.5×28	31
SSC-10	(5) of 20″	2″	60	1/2″	10.5×31.5	33
SSC-12	(4) of 30″	2″	72	1/2″	10.5×41	38
SSC-14	(7) of 20″	2″	84	1/2”	14×31.5	44
SSC-15	(5) of 30″	2″	90	1/2″	10.5×41	38
SSC-16	(4) of 40″	2″	96	1/2″	10.5×51.5	45
SSC-20	(5) of 40″	2″	120	1/2″	10.5×51.5	45
SSC-21	(7) of 30″	2″	126	1/2”	14.5×41.5	55
SSC-R Series (Point of Use)
Model #	Cartridges Requirement	Pipe Size (Flange)	Max. Flow Rate (GPM)	Drain Size (NPT)	Dimensions (W”xH”)	Shipping Weight (lbs)
SSC-1	(1) of 10”	3/4”-1”	6	1/4”	3.5×14	6
SSC-2	(1) of 20”	3/4”-1”	12	1/4”	3.5×24	8
SSC-3	(1) of 30”	3/4”-1”	18	1/4”	3.5×33	11

Features

Standard Features:

Available Options:

3”-10” flanged, 2’’ MPT or 3/4″- 1” FPT connections
Removable cartridge posts for easy cleaning
304 stainless steel housings
1/2” NPT drain connection for SSC-4 or larger
Filtration for: silt, taste, odor or sediment
Air vent for use before start-up or draining
Accepts complete range of filter cartridges
Operating pressure: 150 psi (10.3 bars) maximum
Operating temp.: 40°-300°F (4°-149° C)

Duplex systems
316 stainless steel housings
Differential pressure switch & gauge
Inlet/outlet sample valves
Inlet/outlet pressure gauges
Skid mounted pre-plumbed
Drain valve
Vent valve
Sediment cartridges
Activated carbon cartridges
Electro-polished housing
Isolation valves

Applications

The ideal applications for Multi-cartridge filters include:
Pre-filtration to reverse osmosis systems Pre-filtration to ion exchange and UV units	Food Service Car Washes	Commercial Buildings Agriculture

Docs

Multi-Cartridge Stainless Steel Filter Housings SSC Series Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Industrial Water Softener SF-100S

aqua@2025 — Thu, 13 Mar 2025 13:57:19 +0000

9876ty Aqua Components offers top-notch water softeners that can provide clean water for your industrial applications. Our industrial water softeners have helped hundreds of clients eliminate water hardness problems on important equipment such as boiler feeds, cooling towers, heat-exchangers, etc.

Industrial Water Softener Process

Aqua Components industrial water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling. Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

An Industrial water softener is sized on the basis of two different parameters:

Exchange capacity – which is the quantity of water delivered between regenerations, and it depends upon the amount of ion exchange resin in the softener and quantity of salt used for resin regeneration.
Maximum flow rate – which is the maximum quantity of water required at any peak usage period, and is an important datum in case of non-continuous water delivery and is measured in gallons per minute (GPM)

Aqua Components supplies a full line of standard and fully customizable water softener systems, all of which are engineered using advanced 3D computer modeling software for accurate and customized solutions, and we have several satisfied clients all around the world that use our industrial water softener solutions.

Models

Materials of Construction:	Operating Specifications:
Carbon steel resin tank with blue outer coating NSF rated interior epoxy coating Face piping: PVC/CPVC or galvanized steel Internal distributors: PVC/CPVC Control valves: Noryl or steel Brine Tank: Polyethylene, plastic internals	Operating pressure: 30-100 psi Temperature: 35°-110°F Influent TDS: 0-3000 PPM Pathogenic bacteria: 0 CFU Influent water hardness: 0-90 gpg pH Range: 5-14 Free chlorine: 0–0.5 mg/l Chloramine: 0-0.5 mg/l Turbidity: 0–5 NTU Suspended solids: < 5ppm

Industrial Water Softeners SF-100S Series
Model#	Exchange Capacity @ 15lbs/cu.ft. Grain	Flow Rate (GPM)			Pipe Size		Resin Qty. (ft³)	Tank Size (inch)		Salt Storage (lbs)	Approx. Weight (lbs)
		Service		Backwash	Pipe Size			Tank Size (inch)
		Cont.	Peak	Backwash	Serv.	Drain		Softener	Brine
WS24-240-1.5	240,000	40	70	16	1.5″	1″	8	24×54	24×50	900	919
WS24-240-2		65	120		2″	1″					946
WS24-240-2.5		80	170		2.5″	1″					1,000
WS30-300-1.5	300,000	40	70	25	1.5″	1″	10	30×54	24×50	900	1,426
WS30-300-2		65	120		2″	1″					1,428
WS30-300-2.5		80	170		2.5″	1″					1,458
WS30-300-3		120	270		3″	1″					1,533
WS30-450-1.5	450,000	40	70	25	1.5″	1″	15	30×60	30×50	1,400	1,753
WS30-450-2		65	120		2″	1″					1,753
WS30-450-2.5		80	170		2.5″	1″					1,776
WS30-450-3		120	270		3″	1″					1,826
WS36-600-1.5	600,000	40	70	35	1.5″	1.5″	20	36×60	30×50	1,400	2,400
WS36-600-2		65	120		2″	1.5″					2,460
WS36-600-2.5		80	170		2.5″	1.5″					2,460
WS36-600-3		120	270		3″	1.5″					2,533
WS36-750-2	750,000	65	120	35	2″	1.5″	25	36×72	30×50	1,400	2,833
WS36-750-2.5		80	170		2.5″	1.5″					2,863
WS36-750-3		120	270		3″	1.5″					2,970
WS42-900-2	900,000	65	120	48	2″	2″	30	42×60	50×60	4,500	3,340
WS42-900-2.5		80	170		2.5″	2″					3,378
WS42-900-3		120	270		3″	2″					3,416
WS42-1050-2	1,050,000	65	120	48	2″	2″	35	42×72	50×60	4,500	3,650
WS42-1050-2.5		80	170		2.5″	2″					3,688
WS42-1050-3		120	270		3″	2″					3,726
WS48-1200-2	1,200,000	65	120	63	2″	2″	40	48×72	50×60	4,500	6,200
WS48-1200-2.5		80	170		2.5″	2″					6,230
WS48-1200-3		120	270		3″	2″					6,250
WS48-1200-4		250	500		4″	2″					6,280
WS54-1500-2	1,500,000	65	120	80	2″	2″	50	54×72	50×60	4,500	7,350
WS54-1500-2.5		80	170		2.5″	2″					7,380
WS54-1500-3		120	270		3″	2″					7,410
WS54-1500-4		250	500		4″	2″					7,440
WS60-1950-2	1,950,000	65	120	98	2″	2.5″	65	60×72	50×60	4,500	9,000
WS60-1950-2.5		80	170		2.5″	2.5″					9,030
WS60-1950-3		120	270		3″	2.5″					9,060
WS60-1950-4		250	500		4″	2.5″					9,090
WS66-2400-2.5	2,400,000	80	170	119	2.5″	3″	80	66×72	50×60	4,500	10,700
WS66-2400-3		120	270		3″	3″					10,750
WS66-2400-4		250	500		4″	3″					10,800
WS66-2400-6		400	750		6″	3″					10,850
WS72-3000-3	3,000,000	120	270	141	3″	3″	100	72×72	87×53	7,500	12,300
WS72-3000-4		250	500		4″	3″					12,350
WS72-3000-6		500	800		6″	3″					12,400
WS78-3600-3	3,600,000	120	270	166	3″	3″	120	78×72	87×53	7,500	14,200
WS78-3600-4		250	500		4″	3″					14,250
WS78-3600-6		500	900		6″	3″					14,300
WS84-4200-3	4,200,000	120	270	192	3″	4″	140	84×72	87×53	7,500	16,250
WS84-4200-4		250	500		4″	4″					16,300
WS84-4200-6		500	1000		6″	4″					16,350
For more information, please view/download our “Data Sheet”

Features

Standard Features:

Available Options:

Electrical: 120VAC, 1-Phase, 60 Hz, 5 Amp
Steel tank with 100 psi rating
NSF interior epoxy coated and primed exterior
Top loading port or manway
Schedule 80 PVC face piping
Vent and drain ports
1”-2” Noryl diaphragm valves or butterfly valves for
3’’ or larger
Digital stager for softeners using diaphragm
valves or PLC for butterfly valves
Fully automatic units with timer control, that
initiates regeneration at any pre-determined time
Regeneration cycle is fully adjustable and features
up to 15 programmable timed regeneration cycle
A premium high capacity, cation exchange resin
that will deliver 30,000 gr/ft3 when brined at a rate
of 15 lbs./ft3
Polyethylene brine tank assembly
1/4” tubing between stager and valves
PVC sch 80 internal piping and distributor to
evenly distribute water and prevent resin loss

240V/1ph/50Hz power requirement
Duplex, triplex or multi units
Skid mounted, plumbed, and wired systems
ASME coded resin tanks
Stainless steel, galvanized iron or CPVC face piping
Meter regeneration starts based on the total
gallons used
PLC control system
Brine pump systems
Stainless steel internal piping
Butterfly control valves
Inline hardness monitor
Unistrut channel supports

Applications

The ideal applications for a Water Softener include:
Apartments/Condominiums Groundwater remediation Hospitals	Laundries Boiler Feedwater Contact process water	Car Washes RO Pre-treatment Well Water

Docs

Industrial Water Softener Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Industrial Water Softener Systems SF-110F

aqua@2025 — Thu, 13 Mar 2025 13:57:19 +0000

Aqua Components manufactures and delivers industrial water softener systems for the provision of clean water for any of your industrial applications. We have a comprehensive list of happy clients throughout the world that have realized the usefulness of our water softener solutions.

Aqua Components industrial water softener systems treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling. Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

Industrial Water Softener System Capacity

The SF-110F series softeners are designed as fully automatic units either with timer or meter control. The timer controller initiates automatic regeneration features a choice of 7 or 12 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
The metered models start regeneration based on the total gallons used.
The FRP mineral tank is engineered for a 150 psi working pressure and is tested to 160 psi.
A premium grade sulfanated nonphenolic polystyrene type resin is contained in the mineral tank. The resin will deliver 30,000 grains per cubic foot when brined at a rate of 15 lbs. per cubic foot.
The brine tank is a combination of high density polyethylene tank and a brine valve, including an air eliminator valve and a safety brine refill shut off to prevent tank overflow.
The under drain utilizes either a hub & lateral or a header & lateral system to evenly distribute water and prevent resin loss, and to insure minimal pressure drop at peak flow rates.

Models

System Specifications:
Valve connections: female socket weld, or optional flanged connection Slower flow rate per cu.ft. = better filtration Maximum temperature: 140°F (60°C) Operating pressure: 150 psi (10 bar) for the tank and 100 psi for the overall system	Recommended service flow rates/ranges are based on the cu.ft. of the tank/filter bed 2 GPM/cu.ft. = minimum “superior softening” (< 0.15 grain (3 ppm) of hardness leakage), < 2 psi drop 3.5-5 GPM/cu.ft. = average grade softening (up to 1 grain (17 ppm) of hardness leakage), < 5 psi drop Hardness leakage of < 3 ppm (0.2 grains) @ 6 lb. NaCl, and < 1 ppm (0.1 grains) @ 12 lb. NaCl.	5-10 GPM/cu.ft. = utility softening Backwash rates allow 50% bed expansion at 60°F. Peak flow rates are based on 10 GPM/cu.ft. or > 12 psi loss, whichever occurs first Capacity based on 23 grains (400 ppm) of hardness as CaCO₃ at 2 to 4 GPM/cu.ft. (2 to 1 CaCO₃ to Mg ratio)

Model #	Exchange Capacity @ 15lb/cu.ft. Grain	Flow Rate (GPM)			Valve and Pipe Size	Resin Qty. (ft)	Tank Size		Salt Storage (lbs.)	Approx. Weight (lbs)
		Service		BW			Tank Size
		Cont.	Peak	BW			Softener	Brine
WSF14-90-1	90,000	15	25	6	1″	3	14×65	24×50	900	400
WSF16-120-1	120,000	16	27	7	1″	4	16×65	24×50	900	450
WSF18-150-1.5	150,000	25	40	9	1.5″	5	18×65	24×50	900	575
WSF21-210-1.5	210,000	30	50	12	1.5″	7	21×65	24×50	900	650
WSF24-300-1.5	300,000	40	60	16	1.5″	10	24×72	24×50	900	985
WSF24-300-2	300,000	65	120	16	2″	10	24×72	24×50	900	1,000
WSF30-450-1.5	450,000	40	70	25	1.5″	15	30×72	30×50	1,400	1,470
WSF30-450-2	450,000	65	120	25	2″	15	30×72	30×50	1,400	1,490
WSF36-600-2	600,000	65	120	35	2″	20	36×72	30×50	1,400	1,910
WSF36-600-3	600,000	120	270	35	3″	20	36×72	30×50	1,400	1,980
WSF42-900-2	900,000	65	120	48	2″	30	42×72	30×50	1,400	2,800
WSF42-900-3	900,000	120	270	48	3″	30	42×72	30×50	1,400	2,835
WSF48-1200-2	1,200,000	65	120	63	2″	40	48×72	50×60	4,500	3,650
WSF48-1200-3	1,200,000	120	270	63	3″	40	48×72	50×60	4,500	3,670
WSF63-1500-3	1,500,000	120	300	119	3″	50	63×86	50×60	4,500	4,170
For more information, please view/download our “Data Sheet”

Features

Standard Options:

Available Options:

Electrical: 120VAC, 1-Phase, 60 Hz, 5 Amp
FRP tank with 150 psi rating
Schedule 80 PVC face piping
1”-2” Noryl diaphragm valves or butterfly valves for 3’’ or larger
Vent and drain ports
Digital stager for softeners using diaphragm valves or PLC for
butterfly valves
Fully automatic units with timer control, that initiates
regeneration at any pre-determined time
Regeneration cycle is fully adjustable and features up to 15
programmable timed regeneration cycle
A premium high capacity, cation exchange resin that will
deliver 30,000 gr/ft3 when brined at a rate of 15 lbs./ft3
Polyethylene brine tank assembly
1/4” tubing between stager and valves
PP/PVC sch 80 internal piping and distributor to evenly
distribute water and prevent resin loss

Duplex, triplex or multi units
Skid mounted, plumbed and wired
PLC control system
Steel resin tanks
ASME coded tanks for 18” and up
Butterfly control valves
240V/1ph/50Hz power requirement
Brine pump systems
Unistrut channel supports
Inline hardness monitor
Stainless steel, galvanized iron or
CPVC face piping
Meter regeneration starts based on
the total gallons used

Features

The ideal applications for the SF-110F series include:
Apartments/Condominiums Cooling Tower Hospitals	Groundwater remediation Boiler Feedwater Contact process water	Car Washes RO Pre-treatment Well Water

Docs

Industrial Water Softener Systems Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Commercial Water Softening Systems SF-150S with Fleck Valve

aqua@2025 — Thu, 13 Mar 2025 13:57:19 +0000

Aqua Components offers first-rate commercial water softeners and water softener systems that can provide clean water for your commercial applications. We have several satisfied clients all around the world that use our water softener solutions.

Aqua Components commercial water softeners eliminates hard minerals from the product water using an effective resin. The resin absorbs calcium and magnesium ions (hard minerals) in the water and exchanges it with sodium ions (salt), which is regenerated in a periodic basis. As the hard ions begin greatly outnumbering the sodium ions, the system replenishes the resin with more salt by utilizing a brine solution. This process effectively cleanses off the hardness and adds more salt throughout the surface of the resin. The softened water is then sent to reverse osmosis systems for further treatment in order to completely eradicate the salt without the risk of scaling.

The SF-150S Series water softener is built with the necessary features to target and remove high concentrations of dissolved solids that produce hardness in water, especially magnesium and calcium. These systems consist of extremely high exchange capacity, which makes them suitable for virtually any commercial and industrial applications.

Models

Operating Specifications:
Electrical supply: 120V/1Ph/60Hz/ 2 Amp	Operating temperature: 41-122°F (5-50°C)	Operating pressure: 25-100psi (1.73-6.9 bar)

Model #	Exchange Capacity (Grains)	Serv. Pipe Size (In.)	Drain Pipe Size (In.)	Flow Rate (GPM)			Resin Qty.Ft³	Tank Size (inch)		Salt Storage (Lbs)	Shipping Weight (lbs)
				Service		Back- Wash		Tank Size (inch)
				Average	Peak	Back- Wash		Softener	Brine
27F1490-ST	90,000	1″	1″	19	26	6	3	14X60	24×50	900	256
28F1490-ST		1.5″	1.5″	29	40						263
29F1490-ST		2″	2″	37	54						276
27F16120-ST	120,000	1″	1″	20	27	7	4	16X60	24×50	900	315
28F16120-ST		1.5″	1.5″	33	45						322
29F16120-ST		2″	2″	47	64						335
27F18150-ST	150,000	1″	1″	21	28	9	5	18X60	24×50	900	415
28F18150-ST		1.5″	1.5″	37	49						422
29F18150-ST		2″	2″	56	78						435
27F20180-ST	180,000	1″	1″	21	28	12	6	20×60	24×50	900	600
28F20180-ST		1.5″	1.5″	40	54						650
29F20180-ST		2″	2″	63	81						815
27F20210-ST	210,000	1″	1″	21	27	12	7	20×60	24×50	900	600
28F20210-ST		1.5″	1.5″	40	54						650
29F20210-ST		2″	2″	63	81						815
28F24240-ST	240,000	1″	1″	42	56	16	8	24X60	24×50	900	800
29F24240-ST		1.5″	1.5″	74	97						850
39F24240-ST		2″	2″	107	170						900
28F24300-ST	300,000	1.5″	1.5″	42	56	16	10	24×72	24×50	900	800
29F24300-ST		2″	2″	74	97						850
39F24300-ST		3″	3″	107	170						900
28F30450-ST	450,000	1.5″	1.5″	44	58	25	15	30×60	30×50	1,400	1,205
29F30450-ST		2″	2″	84	105						1,255
39F30450-ST		3″	3″	158	212						1,305
29F36600-ST	600,000	2″	2″	85	105	35	20	36X60	30×50	1,400	1,550
31F36600-ST		2″	2″	88	107						1,600
39F36600-ST		3″	3″	185	250						1,650
31F42750-ST	750,000	2″	2″	90	118	48	25	42×60	50×60	4500	2,300
39F42750-ST	750,000	3″	3″	200	268	48	25	42×60	50×60	4500	2,350
31F42900-ST	900,000	2″	2″	90	118	48	30	42×72	50×60	4,500	2,650
39F42900-ST	900,000	3″	3″	200	268	48	30	42×72	50×60	4,500	2,700
31F481050-ST	1,050,000	2″	2″	95	116	63	35	48X60	50×60	4,500	3,300
39F481050-ST	1,050,000	3″	3″	213	280	63	35	48X60	50×60	4,500	3,350
31F481200-ST	1,200,000	2″	2″	95	116	63	40	48×72	50×60	4,500	3,350
39F481200-ST	1,200,000	3″	3″	213	280	63	40	48×72	50×60	4,500	3,400
39F541500-ST	1,500,000	3″	3″	217	290	80	50	54X60	50×60	4,500	3,500
39F541800-ST	1,800,000	3″	3″	217	290	80	60	54X72	50×60	4,500	3,600
39F602100-ST	2,100,000	3″	3″	220	300	100	70	60×72	50×60	4,500	4,200
For more information, please view/download our “Data Sheet”

Features

Standard Features:	Available Options:
7 day time clock Epoxy lined steel tank, outer primer coat All brass, motor driven control valve with fully adjustable regeneration cycles Self-adjusting backwash controller Flow controller to limit backwash flow Timed brine refill control High exchange capacity polystyrene resin Brine tank with safety valve, cover, and tubing	12 day time clock Meter control Tanks according to ASME code FRP or galvanized steel tanks Stainless steel tanks 240V/1Ph/50Hz power supply Additional micro switch for interlock Twin or Duplex systems Inlet/outlet sample valves Inlet/outlet pressure gauges Hot water applications Nitrate removal systems

Applications

The SF-150S Series water softener is designed specifically to remove high levels of dissolved solids that create hard water conditions, principally Calcium and Magnesium. These systems have a very high operating capacity, which make them ideal for most commercial and industrial applications.

Docs

Commercial Water Softening Systems with Fleck Valve Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Commercial Water Softener SF-200F with Fleck Valve

aqua@2025 — Thu, 13 Mar 2025 13:57:19 +0000

Aqua Components offers commercial water softeners that can provide clean water for your commercial applications. We have several satisfied clients all around the world that use our water softener solutions.

Aqua Components commercial water softeners systems treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt, which is regenerated periodically. The softened water can then pass through a reverse osmosis system to remove the salt without the risk of scaling. Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

Best Water Softener Commercial Applications

Issues regarding water hardness can be detected as your water bills continue to increase. The effects of hard water are seen in commercial applications that consist of equipment which utilizes water. Commercial industries such as hotels, restaurants, car washes, and pharmaceutical companies require pure, soft water in order to produce quality finished products/services.

The detriment of hard water resides in its containment of minerals in high concentrations. When there is an elevated level of hard minerals such as calcium and magnesium in water then scaling can occur when exposed to equipment. Scaling is the build-up of mineral deposits on the surfaces of material such as pipes, toilets, clothes, water heaters & coolers, kitchen appliances, towels, etc. Equipment that is exposed to scaling suffers a reduction in performance and requires greater amounts of maintenance in order to restore the loss of productivity. Clothes that are washed with hard water can produce soiling and discoloring which lowers the quality of the fabric. For this reason, commercial laundries make sure the water that is used to wash the customer’s clothes is of the highest quality.

So which water softener is the best overall value for commercial applications? Commercial water softeners, in particular those manufactured using fleck valves are sufficiently suited with durable and low-energy consumption, which increases productivity. The resin media must also be ensured to have a high exchange capacity, including an effective and reliable softener tank from a reputable source such as Structural Pentair. Commercial water softener systems manufactured and distributed from Aqua Components are incorporated with all of these important features needed to treat hard water for applications in the commercial sector. They are easy-to-use throughout the softening process, incorporate a safety valve, LCD display, and are highly cost-effective.

How a commercial water softener system works?

Commercial water softener systems work by utilizing the concept of ion exchange, which is seen through the pouring of hard water into a treatment tank. The water softener tank contains ion exchange resin beads that are covered with sodium ions. The sodium ions are exchanged with the calcium and magnesium ions (which produce water hardness) during the process, and results in softened water. In order to ensure continued effectiveness of the water softener system, there needs to be an incorporation of a brine tank. A brine tank works by utilizing a brine solution (salt must be added to brine tank manually) to recharge the resin within the water softener tank with sodium ions, once they have been fully replaced with calcium and magnesium ions. This process will allow for consistent hard water reduction through the regeneration of the ion exchange resin beads with sodium ions, and replacement of the calcium and magnesium ions.

How often should a commercial water softener regenerate?

There are a list of factors that need to be taken into account when determining the correct frequency of regeneration for your commercial water softener system. Some of these considerations consists of the level of hardness in the water, the amount of people in the location, and lastly the full tank capacity. If you need more information on selecting the right water softener for your specific application then contact our engineers who will provide all of the answers you need.

Models

Model No.	Exchange Capacity	Pipe Size	Flow Rate (GPM)			Resin Qty. (Ft³)	Tank Size (inch)		Salt Storage (lbs)	Shipping Weight (lbs)
			Average	Peak	Backwash		Softener	Brine
27F1260	60,000	1″	18	24	4	2	12×52	18×40	450	174
28F1260		1.5″	24	37						178
29F1260		2″	28	49						188
27F1375	75,000	1″	18	24	5	2.5	13×54	18×40	450	209
28F1375		1.5″	29	40						213
29F1375		2″	37	52						223
27F1490	90,000	1″	19	26	6	3	14×65	24×50	900	267
28F1490		1.5″	27	40						271
29F1490		2″	37	54						281
27F16120	120,000	1″	20	27	7	4	16×65	24×50	900	337
28F16120		1.5″	33	45						341
29F16120		2″	47	64						351
27F18150	150,000	1″	21	28	9	5	18×65	24×50	900	434
28F18150		1.5″	37	49						438
29F18150		2″	56	78						448
27F21180	180,000	1″	21	28	12	6	21×62	24×50	900	564
28F21180		1.5″	40	54						568
29F21180		2″	63	81						578
27F21210	210,000	1″	20	27	12	7	21×62	24×50	900	614
28F21210		1.5″	39	52						618
29F21210		2″	60	77						628
28F24240	240,000	1.5″	42	56	16	8	24×72	24×50	900	778
29F24240		2″	74	97						788
39F24240		3″	107	170						868
28F24300	300,000	1.5″	40	54	16	10	24×72	24×50	900	878
29F24300		2″	68	99						888
39F24300		3″	158	212						968
28F30450	450,000	1.5″	44	58	25	15	30×72	30×50	1,400	1,390
29F30450		2″	84	105						1,400
39F30450		3″	158	212						1,480
29F36600	600,000	2″	104	105	35	20	36×72	30×50	1,400	1,842
31F36600		2″	78	107						1,862
39F36600		3″	185	250						1,932
31F42750	750,000	2″	86	113	48	25	42×72	50×60	4,500	2,848
39F42750		3″	186	246						2,918
31F42900	900,000	2″	84	118	48	30	42×72	50×60	4,500	3,098
39F42900		3″	200	268						2,918
31F481050	1,050,000	2″	83	109	63	35	48×72	50×60	4,500	3,750
39F481050		3″	166	240						3,820
31F481200	1,200,000	2″	88	116	63	40	48×72	50×60	4,500	4,000
39F481200		3″	213	280						4,070
39F631800	1,800,000	3″	220	300	100	60	63×86	50×60	4,500	6,915
For more information, please view/download our “Data Sheet”

*For twin models: add suffix “T” after model number. All specifications are subject to change without notice.

Features

Standard Features:

Available Options:

7 day time clock
115V/1Ph/60Hz
Premium fiberglass mineral tank
All brass, motor driven control valve with fully adjustable regeneration cycles
Operating pressure: 30 – 125 psi (2 – 8.5 bars)
Operating temperature: 35 – 100°F (2 – 38°C)
Self-adjusting backwash controller
Flow controller to limit backwash flow
Timed brine refill control
High exchange capacity polystyrene resin
Rigid polyethylene brine tank with safety brine valve, dust cover, and tubing

12 day time clock
Meter control
Tanks according to ASME code
Stainless steel tanks
Epoxy lined or galvanized steel tanks
240V/1Ph/50Hz
Additional micro switch for interlock
Twin units using system 5, 6, or 7 interlock wiring
Inlet / Outlet sample valves
Inlet / Outlet pressure gauges
Systems using diaphragm valves
Hot water applications
Systems for nitrate removal
Vacuum breaker
Twin or Duplex systems

Applications

The SF-200F Series water softener is designed specifically to remove high levels of dissolved solids that create “hard water” conditions, principally Calcium and Magnesium.

These systems have a very high operating capacity, which make them ideal for most commercial and industrial applications including:
Hotels and Motels Nursing Homes Well Water Treatment Beauty Shops	Hospitals Apartment Buildings Car Washes Office Buildings	Schools Laundries Restaurants Boiler Feed Water

Docs

Commercial Water Softener with Fleck Valve Data Sheet Twin Tank Water Softener with Fleck Valve Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

Commercial Water Softener System SF-250A with Autotrol Valve

aqua@2025 — Thu, 13 Mar 2025 13:57:19 +0000

Aqua Components offers the SF-250A Series water softener with Autotrol valve that is designed specifically to remove high levels of dissolved solids that create hard water conditions, principally Calcium and Magnesium. Aqua Components water softeners treat water by removing hardness using resin. The resin replaces the hardness in the water with salt, which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling. Softeners can be used in a variety of services including industrial, municipal, and institutional applications.

Our water softeners utilize high quality control valves manufactured by Autotrol. We are pleased to stock a comprehensive selection of Autotrol control valves that have remained extremely reliable in use with our water softeners. Autotrol valves work to monitor water usage and determine the appropriate time for regeneration.

Models

Operating Specifications:
Electrical supply: 115V/1Ph/60Hz Operating temperature: 35 – 100°F (2 – 38°C) Operating pressure: 30 – 125 psi (2 – 8.5 bar)	For Twin System, please add the suffix “T” after the model number Above softeners can be supplied in 240V/50Hz

Model #	Exchange Capacity (Grains)	Pipe Size	Flow Rate (GPM)			Resin Qty. (Ft³)	Tank Size (Inch)		Salt Storage (lbs)	Shipping Weight (lbs)
Model #	Exchange Capacity (Grains)	Pipe Size	Avg.	Peak	Backwash	Resin Qty. (Ft³)	Softener	Brine	Salt Storage (lbs)	Shipping Weight (lbs)
CV Series 7 Day Time Clock Control
CVP16120	120,000	2″	30	45	7	4	16 X 65	24 X 50	900	365
CVP18150	150,000	2″	42	59	9	5	18 X 65	24 X 50	900	453
CVP21180	180,000	2″	52	71	12	6	21 X 62	24 X 50	900	563
CVP21210	210,000	2″	50	68	12	7	21 X 62	24 X 50	900	608
CVP24240	240,000	2″	49	67	15	8	24 X 72	24 X 50	900	818
CVP24300	300,000	2″	52	68	15	10	24 X 72	24 X 50	900	908
CVP30450	450,000	2″	60	81	25	15	30 X 72	30 X 50	1,400	1,380
CVP36600	600,000	2″	65	95	35	20	36 X 72	30 X 50	1,400	1,762
For more information, please view/download our “Data Sheet”

Features

Standard Features:

Available Options:

7 day time clock
115V/1Ph/60Hz
Premium fiberglass mineral tank
Automatic motor driven control valve with fully adjustable regeneration cycles
Operating pressure: 30 – 125 psi (2 – 8.5 bars)
Operating temperature: 35 – 100°F (2 – 38°C)
Self-adjusting backwash controller
Flow controller to limit backwash flow
Timed brine refill control
High exchange capacity polystyrene resin
Rigid polyethylene brine tank with safety brine valve, dust cover, and tubing

Meter control
Tanks according to ASME code
Epoxy lined steel tanks
Stainless steel tanks
240V/1Ph/50Hz power supply
Additional micro switch for interlock
Interlock wiring
Inlet / Outlet sample valves
Inlet / Outlet pressure gauges
Systems using diaphragm valves
Hot water applications
Systems for nitrate removal
Vacuum breaker

Applications

Aqua Components water softeners are commonly used for industrial, and commercial applications such as:
Household water Protection of heat transfer elements and spray nozzles Cooling tower make-up water High purity water	Boiler & reactor feed and make-up water Wastewater re-use Spot free rinse water	Contact process water Pre-treatment for reverse osmosis or ion exchange systems Groundwater remediation

The SF-250A Series water softener uses control valves from Autotrol and is designed specifically to remove high levels of dissolved solids that create “hard water” conditions, principally Calcium and Magnesium. These systems have a very high operating capacity, which make them ideal for most commercial and industrial applications.

Docs

Commercial Water Softener System with Autotrol Valve Data Sheet

360 View

Here at Aqua Components LLC, we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.