Toray Ultrafiltration Membranes – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:46:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4

Toray HFU-B2315AN Membrane https://aquacomponents.sa/product/toray-hfu-b2315an-membrane/ Thu, 13 Mar 2025 12:46:24 +0000 https://aquacomponents.sa/product/toray-hfu-b2315an-membrane/ Toray’s HFU-B2315AN pressurized hollow-fiber ultrafiltration (UF) membrane module applies advanced PVDF membrane chemistry and thermallyinduced phase separation (TIPS) spinning method that carefully controls the pore size and evenly distributes the number of pores on the membrane surface. The result is a hollow-fiber membrane with fine separation of viruses, bacteria, and suspended solids, low fouling, and high permeability all to help optimize and extend plant performance.

Models

Table 1: Membrane Properties
Membrane material PVDF (Polyvinylidene fluoride)
Nominal pore size μm 0.01
Table 2: Cleaning Limits
Cleaning pH Range 0-12
Maximum cleaning temperature 40°C (104°F)
Maximum concentration of NaClO cleaning as Cl2 3,000 mg/L (10 ≤ pH ≤ 12)
Maximum NaClO exposure (lifetime contact time) as Cl2 1,000,000 mg/L hours
Maximum acid exposure contact time 1,000 hours (pH < 1)
Table 3: Module Specifications
Module Part Number HFU-B2315AN
Outer Membrane Surface Area ft2 (m2) 646 (60)

Dimensions

Diameter in (mm)

 7.01 (178)

Length ft (mm)

7.651 (2,332)

Weight

lbs (kg)

Full of water

 143 (65)

After draining

77 (35)

Material

Casing / Protective Cylinder

 PVC and/or equivalent

Potting

Epoxy and/or equivalent

Operating Conditions

Filtration method

 Outside to inside, dead end

Maximum inlet pressure psi (kPa)

43.5 (300)

Maximum trans-membrane pressure (TMP) psi (kPa)

43.5 (300)

Normal operating TMP psi (kPa)

< 29.0 (< 200)

Operating temperature range

32–104°F (0–40°C)

Operating pH range

1–10
Features
  • Tightest pore size (0.01 μm) in the industry
  • High mechanical tensile strength of hollow-fiber for minimal fiber breakage
  • Chemically-tolerant for operational longevity
  • High packing density (60 m2) per module allows for compact system design and room for future expansion
  • Technical support and expertise within your reach

Applications

  • Drinking Water Produciton
  • Industrial Water Treatment
  • Seawater Desalination (for RO pretreatment)
  • Waste Tertiary Treatment

Docs
Toray HFU-B2315AN Membrane Data Sheet
]]> Toray HSU-1515 Membrane https://aquacomponents.sa/product/toray-hsu-1515-membrane/ Thu, 13 Mar 2025 12:44:30 +0000 https://aquacomponents.sa/product/toray-hsu-1515-membrane/ TORAY’s special PVDF (polyvinylidene fluoride) spinning method allows for greater chemical and mechanical strength without breaking the fibre. The special membrane structure of TORAY and the Outside-to-Inside flow direction allow for longer-term higher flux activity.

Specifications
Nominal MWCO Nominal Pore Size Membrane Area Max. Feed Water Flow
150,000 Da 0.01 micorn 20 m² 2.0m³/h
Operating Limits
Min. Feed Temperature Max. Feed Temperature Max. Filtrating Trans-Membrane Pressure Feed pH Range Operation
0°C 40°C 100 kPa 1 – 10
Dimension
Length Module Diameter Weight (wet condition) Connection Filtrate Outlet
1,327 mm 147 mm 18 kg IDF/ISO Clamp Union Fittings 1.5s

Models

Toray HSU-1515 Membrane

Features
  • Simple operating control
  • Low energy consumption
  • High efficiency in organic substance removal
Applications
  • Drinking Water Produciton
  • Industrial Water Treatment
  • Seawater Desalination (for RO pretreatment)
  • Waste Tertiary Treatment
]]> Toray HFU-1020AN Membrane https://aquacomponents.sa/product/toray-hfu-1020an-membrane/ Thu, 13 Mar 2025 12:44:26 +0000 https://aquacomponents.sa/product/toray-hfu-1020an-membrane/ TORAY ‘s special PVDF (polyvinylidene fluoride) spinning method allows for greater chemical and mechanical strength without breaking the fibre. The special membrane structure of TORAY and the Outside-to-Inside flow direction allow for longer-term higher flux activity.

Specifications
Nominal MWCO Membrane Area Membrane Surface Area
[Outer Surface]		 Design Flux
150,000 Da 0.01 micorn 29 m²
(312 ft²)		 3.2 – 1.1 m³/h
Operating Limits
Min. Feed Temperature Max. Feed Temperature Max. Feed Pressure Feed pH Range Operation Feed pH Range Cleaning
0°C 40°C 300 kPa 1 – 10 0 – 12
Dimension
Length Module Diameter Weight (Full of water) Weight (After draing) Connection Filtrate Outlet Connection Air Outlet Connection Raw Water/Air Inlet
1,120 mm 216 mm 60 kg 40 kg 80A 65A 80A

Models

Toray HFU-1020AN Membrane

Features
  • Simple operating control
  • Low energy consumption
  • High efficiency in organic substance removal
Applications
  • Drinking Water Produciton
  • Industrial Water Treatment
  • Seawater Desalination (for RO pretreatment)
  • Waste Tertiary Treatment
Docs
Toray HFU-1020an Membrane Data Sheet
]]> Toray HFU-2020AN Membrane https://aquacomponents.sa/product/toray-hfu-2020an-membrane/ Thu, 13 Mar 2025 12:44:20 +0000 https://aquacomponents.sa/product/toray-hfu-2020an-membrane/
Specifications
Nominal MWCO Membrane Area Membrane Surface Area
[Outer Surface]		 Design Flux
150,000 Da 0.01 micorn 72 m²
(775 ft²)		 3.2 – 1.1 m³/h
Operating Limits
Min. Feed Temberature Max. Feed Temperature Max. Feed Pressure Feed pH Range Operation Feed pH Range Cleaning
0°C 40°C 300 kPa 1 – 10 0 – 12
Dimension
Length Module Diameter Weight (Full of water) Weight (After draing) Connection Filtrate Outlet Connection Air Outlet Connection Raw Water/Air Inlet
2,160 mm 216 mm 92 kg 49 kg 80A 65A 80A

Models

Toray HFU-2020AN Membrane

Features
  • Simple operating control
  • Low energy consumption
  • High efficiency in organic substance removal
Applications
  • Drinking Water Produciton
  • Industrial Water Treatment
  • Seawater Desalination (for RO pretreatment)
  • Waste Tertiary Treatment
]]>