Toray Tap & Brackish Water RO Membranes – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:45:56 +0000 en-US hourly 1 https://wordpress.org/?v=7.0

Toray TLF-400DG Membrane https://aquacomponents.sa/product/toray-tlf-400dg-membrane/ Thu, 13 Mar 2025 12:45:55 +0000 https://aquacomponents.sa/product/toray-tlf-400dg-membrane/  

1. Membrane Type

 

Cross Linked Fully Aromatic Polyamide Composite

2. Test Conditions

Feed Water Pressure

Feed Water Temperature

Feed Water 

Concentration Recovery Rate

Feed Water pH

150 psi(1.05MPa)

77°F (25°C)

2,000 mg/l NaCl

15%

7

3. Minimum Salt Rejection

 

99.2%

4. Minimum Product Flow Rate

 

9,300gpd (35.2m3/d) (TLF-400DG)
Models
Specifications:

Type

Diameter Inch

Membrane Area ft2(m2)

Salt Rejection %

Product Flow Rate gpd(m3/d)

Feed Spacer Thickness mil

TLF-400DG

8”

400(37)

99.5

11,500(43.5)

34

Features

TM Element Type Features:
  • New membrane types: Ultra low pressure, SWRO High Flux
  • Larger membrane surface area
  • Superior mechanical strength
Operating Limits
  • Maximum Operating Pressure: 600 psi (4.1 MPa)
  • Maximum Feed Water Temperature: 113°F (45??
  • Maximum Feed Water SDI15: 5
  • Feed Water Chlorine Concentration: < 0.1ppm
  • Feed Water pH Range, Continuous Operation: 2-11
  • Feed Water pH Range, Chemical Cleaning: 1-13
  • Maximum Pressure Drop per Element: 15psi (0.10 MPa)
  • Maximum Pressure Drop per Vessel: 50psi (0.34 MPa

Applications

  • Municipal industrial
  • Process water
  • Commercial applications

Docs

Toray TLF-400DG Membrane Data Sheet

]]> Toray SUL-G20FTS Membrane https://aquacomponents.sa/product/toray-sul-g20fts-membrane/ Thu, 13 Mar 2025 12:45:51 +0000 https://aquacomponents.sa/product/toray-sul-g20fts-membrane/ NaCl Solution

Salt Rejection 1: 99.5 %²

Product Flow Rate 1: 36m³/day (9500 gpd)³

Models

MODEL SUL-G20FTS
  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

  • Eliminate the environmental contaminants
  • Recover acid flows.
  • Hot condensate cleaner
  • Pre-concentrate fluxes before evaporator
  • Reduce the volume of wastewater by increasing the water reuse
  • Reduce operating costs

Notes:

1. Test Conditions Feed Water Pressure 0.75 MPa (110psi)

  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration 500 mg/ as NaCl
  • Brine Flow Rate 80 /min. (21 gpm)
  • Feed Water pH 6.5

2. 99.0 % minimum*

3. 29 m³/day ( 7660 gpd) minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Reverse osmosis plants

Docs

Toray SUL-G20FTS Membrane Data Sheet

]]> Toray SUL-G20TS Membrane https://aquacomponents.sa/product/toray-sul-g20ts-membrane/ Thu, 13 Mar 2025 12:45:47 +0000 https://aquacomponents.sa/product/toray-sul-g20ts-membrane/ NaCl Solution

Salt Rejection 1,2: 99.5 %²

Product Flow Rate 1,2: 30m³/day (7900 gpd)³

Models

MODEL SUL-G20TS
  • Membrane Type: Cross Linked Fully Aromatic Polyamide Composite
  • Element Configuration: Spiral Wound

Features

  • Eliminate the environmental contaminants
  • Recover acid flows.
  • Hot condensate cleaner
  • Pre-concentrate fluxes before evaporator
  • Reduce the volume of wastewater by increasing the water reuse
  • Reduce operating costs

Notes:

1. Test Conditions

  • Feed Water Pressure 0.75 MPa (110psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration 500 mg/ as NaCl
  • Brine Flow Rate 80 /min. (21.1 gpm)
  • Feed Water pH 6.5

2. 99.0 % minimum

3. 24 m³/day minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Reverse osmosis plants

Docs

Toray SUL-G20TS Membrane Data Sheet

]]> Toray SUL-G10TS Membrane https://aquacomponents.sa/product/toray-sul-g10ts-membrane/ Thu, 13 Mar 2025 12:45:44 +0000 https://aquacomponents.sa/product/toray-sul-g10ts-membrane/ NaCI Solution

Salt Rejection1,2: 99.5%²

Product Flow Rate1,2: 5m³/day (1300 gpd)³

Models

MODEL SUL-G10TS

Membrane Type: Cross Linked Fully Aromatic Polyamide

Composite Element Configuration: Spiral Wound

Features

TM Element Type Features:
  • New membrane types:Ultra low pressure, SWRO High Flux
  • Larger membrane surface area
  • Superior mechanical strength

Notes :

1. Test Conditions Feed Water Pressure 0.75 MPa (110 psi)

  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration 500 mg/ as NaCl
  • Brine Flow Rate 20 /min. (5.3 gpm)
  • Feed Water pH 6.5

2. 99.0 % minimum*

3. 4.3 m³/day (1100 gpd) minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Commercial applications

Docs

Toray SUL-G10TS Membrane Data Sheet

]]> Toray SU-720TS Membrane https://aquacomponents.sa/product/toray-su-720ts-membrane/ Thu, 13 Mar 2025 12:45:38 +0000 https://aquacomponents.sa/product/toray-su-720ts-membrane/ NaCl Solution

Salt Rejection 1,2: 99.4 %²

Product Flow Rate 1,2: 26m³/day (6900 gpd)³

Models

MODEL SU-720TS

  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

  • Eliminate the environmental contaminants
  • Recover acid flows.
  • Hot condensate cleaner
  • Pre-concentrate fluxes before evaporator
  • Reduce the volume of wastewater by increasing the water reuse
  • Reduce operating costs

Notes:

1. Test Conditions

  • Feed Water Pressure 1.5 MPa (220 psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration 1500 mg/ as NaCl
  • Brine Flow Rate 80 /min. (21 gpm)
  • Feed Water pH 6.5

2. 99.0 % minimum

3. 22 m³/day (5810 gpd) minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Reverse osmosis plants

Docs

Toray SU-720TS Membrane Data Sheet

]]> Toray SU-710T Membrane https://aquacomponents.sa/product/toray-su-710t-membrane/ Thu, 13 Mar 2025 12:45:34 +0000 https://aquacomponents.sa/product/toray-su-710t-membrane/ NaCI Solution

Salt Rejection 1: 99.4 %²

Product Flow Rate 1: 6.5m³/day (1720 gpd)³

Models

MODEL SU-710T

  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

TM Element Type Features:
  • New membrane types:Ultra low pressure, SWRO High Flux
  • Larger membrane surface area
  • Superior mechanical strength

Notes:

1. Test Conditions

  • Feed Water Pressure 1.5 MPa (220 psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration 1500mg/ as NaCl
  • Brine Flow Rate 20 /min. (5.3 gpm)
  • Feed Water pH 6.5

2. 99.0 % minimum*

3. 5.5 m³/day (1450 gpd) minimum* *For any single element

4. Expected performance after sanitization (for reference)

Applications

  • Municipal industrial
  • Process water
  • Commercial applications

Docs

Toray SU-710T Membrane Data Sheet

]]> Toray SUL-G20P Membrane https://aquacomponents.sa/product/toray-sul-g20p-membrane/ Thu, 13 Mar 2025 12:45:30 +0000 https://aquacomponents.sa/product/toray-sul-g20p-membrane/ Performance Specification

Product Flow Rate1: 32m³/day (8500 gpd)²

Models

MODEL SUL-G20P
  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

  • Eliminate the environmental contaminants
  • Recover acid flows.
  • Hot condensate cleaner
  • Pre-concentrate fluxes before evaporator
  • Reduce the volume of wastewater by increasing the water reuse
  • Reduce operating costs

Notes:

1. Test Conditions

  • Feed Water Pressure 0.75 MPa (110 psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration Pure water
  • Brine Flow Rate 80 /min. (2 gpm)

2. 28 m³/day (7400 gpd) minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Reverse osmosis plants

Docs

Toray SUL-G20P Membrane Data Sheet

]]> Toray SUL-G10P Membrane https://aquacomponents.sa/product/toray-sul-g10p-membrane/ Thu, 13 Mar 2025 12:45:27 +0000 https://aquacomponents.sa/product/toray-sul-g10p-membrane/ Performance Specification

Product Flow Rate1: 7.5m³/day (2000 gpd)²

Models

MODEL SUL-G10P

  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

TM Element Type Features:
  • New membrane types:Ultra low pressure, SWRO High Flux
  • Larger membrane surface area
  • Superior mechanical strength

Notes:

1. Test Conditions

  • Feed Water Pressure 0.75 MPa (110 psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration 500 mg/ as NaCl
  • Brine Flow Rate 20 /min. (5.3 gpm)
  • Feed Water pH 6.5

2. 6.5 m³/day minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Commercial applications

Docs

Toray SUL-G10P Membrane Data Sheet

]]> Toray SU-720P Membrane https://aquacomponents.sa/product/toray-su-720p-membrane/ Thu, 13 Mar 2025 12:45:23 +0000 https://aquacomponents.sa/product/toray-su-720p-membrane/ Performance Specification

Product Flow Rate 1: 32m³/day (8500 gpd)²

Models

MODEL SU-720P
  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

  • Eliminate the environmental contaminants
  • Recover acid flows.
  • Hot condensate cleaner
  • Pre-concentrate fluxes before evaporator
  • Reduce the volume of wastewater by increasing the water reuse
  • Reduce operating costs

Notes : ??

1. Test Conditions

  • Feed Water Pressure 1.5 MPa (220 psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration Pure water
  • Brine Flow Rate 80 /min. (21.1 gpm)
  • Feed Water pH 6.5

2. 28 m³/day (7400 gpd) minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Reverse osmosis plants

Docs

Toray SU-720P Membrane Data Sheet

]]> Toray SU-710P Membrane https://aquacomponents.sa/product/toray-su-710p-membrane/ Thu, 13 Mar 2025 12:45:19 +0000 https://aquacomponents.sa/product/toray-su-710p-membrane/ Performance Specification

Product Flow Rate: 8m³/day² (2100 GPD)

Models

MODEL SU-710P

  • Membrane Type: Cross Linked Fully Aromatic Polyamide
  • Composite Element Configuration: Spiral Wound

Features

TM Element Type Features:
  • New membrane types:Ultra low pressure, SWRO High Flux
  • Larger membrane surface area
  • Superior mechanical strength

Notes :

1. Test Conditions

  • Feed Water Pressure 1.5 MPa (220 psi)
  • Feed Water Temperature 25 °C (77 °F)
  • Feed Water Concentration Pure water
  • Brine Flow Rate 20 /min. (5.3 gpm)
  • Feed Water pH 6.5

2. 7 m³/day (1850 GPD) minimum* *For any single element

Applications

  • Municipal industrial
  • Process water
  • Commercial applications

Docs

Toray SU-710P Membrane Data Sheet

]]>