Toray Membranes – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:46:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4

Toray HFU-B2315AN Membrane https://aquacomponents.sa/product/toray-hfu-b2315an-membrane/ Thu, 13 Mar 2025 12:46:24 +0000 https://aquacomponents.sa/product/toray-hfu-b2315an-membrane/ Toray’s HFU-B2315AN pressurized hollow-fiber ultrafiltration (UF) membrane module applies advanced PVDF membrane chemistry and thermallyinduced phase separation (TIPS) spinning method that carefully controls the pore size and evenly distributes the number of pores on the membrane surface. The result is a hollow-fiber membrane with fine separation of viruses, bacteria, and suspended solids, low fouling, and high permeability all to help optimize and extend plant performance.

Models

Table 1: Membrane Properties
Membrane material PVDF (Polyvinylidene fluoride)
Nominal pore size μm 0.01
Table 2: Cleaning Limits
Cleaning pH Range 0-12
Maximum cleaning temperature 40°C (104°F)
Maximum concentration of NaClO cleaning as Cl2 3,000 mg/L (10 ≤ pH ≤ 12)
Maximum NaClO exposure (lifetime contact time) as Cl2 1,000,000 mg/L hours
Maximum acid exposure contact time 1,000 hours (pH < 1)
Table 3: Module Specifications
Module Part Number HFU-B2315AN
Outer Membrane Surface Area ft2 (m2) 646 (60)

Dimensions

Diameter in (mm)

 7.01 (178)

Length ft (mm)

7.651 (2,332)

Weight

lbs (kg)

Full of water

 143 (65)

After draining

77 (35)

Material

Casing / Protective Cylinder

 PVC and/or equivalent

Potting

Epoxy and/or equivalent

Operating Conditions

Filtration method

 Outside to inside, dead end

Maximum inlet pressure psi (kPa)

43.5 (300)

Maximum trans-membrane pressure (TMP) psi (kPa)

43.5 (300)

Normal operating TMP psi (kPa)

< 29.0 (< 200)

Operating temperature range

32–104°F (0–40°C)

Operating pH range

1–10
Features
  • Tightest pore size (0.01 μm) in the industry
  • High mechanical tensile strength of hollow-fiber for minimal fiber breakage
  • Chemically-tolerant for operational longevity
  • High packing density (60 m2) per module allows for compact system design and room for future expansion
  • Technical support and expertise within your reach

Applications

  • Drinking Water Produciton
  • Industrial Water Treatment
  • Seawater Desalination (for RO pretreatment)
  • Waste Tertiary Treatment

Docs
Toray HFU-B2315AN Membrane Data Sheet
]]> Toray TUF 5K HR Membrane https://aquacomponents.sa/product/toray-tuf-5k-hr-membrane/ Thu, 13 Mar 2025 12:46:20 +0000 https://aquacomponents.sa/product/toray-tuf-5k-hr-membrane/ A low flux membrane with maximum retention. special applications in dairy, gelatine, sugar, etc.

Models

Toray TUF 5K HR Membrane

Model

Application

Feed SpacerThicknessin. (mm)

Nominal Membrane Area ft2 (m2)

Dimensions, in. (mm)

Max Pressure Drop per Element psi (bar)

Length

A

Element OD B

Perm Tube ID C

TUF3838 N1 & TUF3838 HRN1

 Milk and Whey Protein Concentration USDA Accepted 3A / FDA Compliant

0.031 (0.79)

73 (6.8)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF3838 N2 & TUF3838 HRN2

0.046 (1.17)

57 (5.3)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF6338N1 & TUF6338HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N1 & TUF6438HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N2 & TUF6338HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N2 & TUF6438HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N3 & TUF6338HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N3 & TUF6438HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF 7838N1

0.031 (0.79)

343 (31.9)

38 (965)

7.73 (196)

1.125 (28.6)

15 (1.0)

TUF8038N1 & TUF8038HRN1

0.031 (0.79)

360 (33.5)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

TUF8038N2 & TUF8038HRN2

0.046 (1.17)

280 (26)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

For more information, please view/download our “Data Sheet”

Features

Nominal Molecular Weight Cut-off
  • 5,000 Daltons
Product Type
  • Net-Wrapped (no tail), Spiral Wound Element with hydrophillic Polyethersulfone Asymmetric Membrane
  • Developed specifically for maximum retention of milk and whey proteins and maximum capacity
Materials Specifications
  • Feed Spacers and Element Outer-Wrap: Polypropylene
  • Permeate Carrier: Proprietary
  • Adhesives: Proprietary
Operating Limits
  • Maximum Operating Pressure, psi (bar): 140 (9.7)
  • Maximum Operating Temperature, °F (°C): 131 (55)
  • Maximum Cleaning Temperature, °F (°C): 122 (50)
  • Acceptable pH Range (operating) : 2.5-10.0
  • Acceptable pH Range (short-term cleaning) : 1.7-11.5
  • Maximum Chlorine Tolerance (short-term cleaning at pH 11), ppm 180
  • Maximum Pressure Drop per Vessel, psi (bar): 60 (4.0)
  • (Consult Toray for pressure limits when operating above ambient temperature)
Notice:

1. Elements are preserved in sodium meta-bisulfite. Appropriate personal protective equipment should be worn when handling.
2. Toray accepts no responsibility for results obtained by the application of this information or the safety or suitability of Toray’s
products, either alone or in combination with other products. Users are advised to make their own tests to determine the
safety and suitability of each product combination for their own purposes.
3. All data may change without prior notice, due to technical modifications or production changes.
4. Consult Toray for element sizes not shown.
5. Product description;
– 10K: Standard product with good flux and good rejection, across a broad range concentrations
– 10KHR: Used in 10K Systems for highest true protein rejection at good flux

Applications
  • Food & Beverages
  • Dairy Industry
  • Pharmaceutical
  • Heat Sanitizable applications

Docs

Toray TUF 5K Membrane

]]> Toray TUF 5K Membrane https://aquacomponents.sa/product/toray-tuf-5k-membrane/ Thu, 13 Mar 2025 12:46:18 +0000 https://aquacomponents.sa/product/toray-tuf-5k-membrane/ A very high retention membrane. A direct replacement for competitor 5K membranes.

Models

Toray TUF 5K Membrane

Model

Application

Feed SpacerThicknessin. (mm)

Nominal Membrane Area ft2 (m2)

Dimensions, in. (mm)

Max Pressure Drop per Element psi (bar)

Length

A

Element OD B

Perm Tube ID C

TUF3838 N1 & TUF3838 HRN1

 Milk and Whey Protein Concentration USDA Accepted 3A / FDA Compliant

0.031 (0.79)

73 (6.8)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF3838 N2 & TUF3838 HRN2

0.046 (1.17)

57 (5.3)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF6338N1 & TUF6338HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N1 & TUF6438HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N2 & TUF6338HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N2 & TUF6438HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N3 & TUF6338HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N3 & TUF6438HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF 7838N1

0.031 (0.79)

343 (31.9)

38 (965)

7.73 (196)

1.125 (28.6)

15 (1.0)

TUF8038N1 & TUF8038HRN1

0.031 (0.79)

360 (33.5)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

TUF8038N2 & TUF8038HRN2

0.046 (1.17)

280 (26)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

For more information, please view/download our “Data Sheet”

Features

Nominal Molecular Weight Cut-off
  • 5,000 Daltons
Product Type
  • Net-Wrapped (no tail), Spiral Wound Element with hydrophillic Polyethersulfone Asymmetric Membrane
  • Developed specifically for maximum retention of milk and whey proteins and maximum capacity
Materials Specifications
  • Feed Spacers and Element Outer-Wrap: Polypropylene
  • Permeate Carrier: Proprietary
  • Adhesives: Proprietary
Operating Limits
  • Maximum Operating Pressure, psi (bar): 140 (9.7)
  • Maximum Operating Temperature, °F (°C): 131 (55)
  • Maximum Cleaning Temperature, °F (°C): 122 (50)
  • Acceptable pH Range (operating) : 2.5-10.0
  • Acceptable pH Range (short-term cleaning) : 1.7-11.5
  • Maximum Chlorine Tolerance (short-term cleaning at pH 11), ppm 180
  • Maximum Pressure Drop per Vessel, psi (bar): 60 (4.0)
  • (Consult Toray for pressure limits when operating above ambient temperature)
Notice:

1. Elements are preserved in sodium meta-bisulfite. Appropriate personal protective equipment should be worn when handling.
2. Toray accepts no responsibility for results obtained by the application of this information or the safety or suitability of Toray’s
products, either alone or in combination with other products. Users are advised to make their own tests to determine the
safety and suitability of each product combination for their own purposes.
3. All data may change without prior notice, due to technical modifications or production changes.
4. Consult Toray for element sizes not shown.
5. Product description;
– 10K: Standard product with good flux and good rejection, across a broad range concentrations
– 10KHR: Used in 10K Systems for highest true protein rejection at good flux

Applications

  • Food & Beverages
  • Dairy Industry
  • Pharmaceutical
  • Heat Sanitizable applications

Docs

Toray TUF 5K Membrane Data Sheet

]]> Toray TUF 10K HR Membrane https://aquacomponents.sa/product/toray-tuf-10k-hr-membrane/ Thu, 13 Mar 2025 12:46:16 +0000 https://aquacomponents.sa/product/toray-tuf-10k-hr-membrane/ A very high protein retention membrane but with good flux. High concentration end of whey plants and WPI plants. 

Models

Sanitary TUF10K HR

Model

Application

Feed SpacerThicknessin. (mm)

Nominal Membrane Area ft2 (m2)

Dimensions, in. (mm)

Max Pressure Drop per Element psi (bar)

Length

A

Element OD B

Perm Tube ID C

TUF3838 N1 & TUF3838 HRN1

 Milk and Whey Protein Concentration USDA Accepted 3A / FDA Compliant

0.031 (0.79)

73 (6.8)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF3838 N2 & TUF3838 HRN2

0.046 (1.17)

57 (5.3)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF6338N1 & TUF6338HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N1 & TUF6438HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N2 & TUF6338HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N2 & TUF6438HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N3 & TUF6338HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N3 & TUF6438HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF 7838N1

0.031 (0.79)

343 (31.9)

38 (965)

7.73 (196)

1.125 (28.6)

15 (1.0)

TUF8038N1 & TUF8038HRN1

0.031 (0.79)

360 (33.5)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

TUF8038N2 & TUF8038HRN2

0.046 (1.17)

280 (26)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

For more information, please view/download our “Data Sheet”

Features

Nominal Molecular Weight Cut-off
  • 10,000 Daltons
Product Type
  • Net-Wrapped (no tail), Spiral Wound Element with hydrophillic Polyethersulfone Asymmetric Membrane
  • Developed specifically for maximum retention of milk and whey proteins and maximum capacity
Materials Specifications
  • Feed Spacers and Element Outer-Wrap: Polypropylene
  • Permeate Carrier: Proprietary
  • Adhesives: Proprietary
Operating Limits
  • Maximum Operating Pressure, psi (bar): 140 (9.7)
  • Maximum Operating Temperature, °F (°C): 131 (55)
  • Maximum Cleaning Temperature, °F (°C): 122 (50)
  • Acceptable pH Range (operating) : 2.5-10.0
  • Acceptable pH Range (short-term cleaning) : 1.7-11.5
  • Maximum Chlorine Tolerance (short-term cleaning at pH 11), ppm 180
  • Maximum Pressure Drop per Vessel, psi (bar): 60 (4.0)
  • (Consult Toray for pressure limits when operating above ambient temperature)
Notice:

1. Elements are preserved in sodium meta-bisulfite. Appropriate personal protective equipment should be worn when handling.
2. Toray accepts no responsibility for results obtained by the application of this information or the safety or suitability of Toray’s products, either alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each product combination for their own purposes.
3. All data may change without prior notice, due to technical modifications or production changes.
4. Consult Toray for element sizes not shown.
5. Product description;
– 10K: Standard product with good flux and good rejection, across a broad range concentrations
– 10KHR: Used in 10K Systems for highest true protein rejection at good flux

Applications
  • Drinking Water Produciton
  • Industrial Water Treatment
  • Seawater Desalination (for RO pretreatment)
  • Waste Tertiary Treatment

Docs

Toray TUF 10K HR Membrane Data Sheet

]]> Toray TUF 10K Membrane https://aquacomponents.sa/product/toray-tuf-10k-membrane/ Thu, 13 Mar 2025 12:46:14 +0000 https://aquacomponents.sa/product/toray-tuf-10k-membrane/ Our standard UF that outperforms industry benchmarks on both flux and protein retention. Whey processing at all concentrations, MPC.

Models

Sanitary TUF 10K

Model

Application

Feed SpacerThicknessin. (mm)

Nominal Membrane Area ft2 (m2)

Dimensions, in. (mm)

Max Pressure Drop per Element psi (bar)

Length

A

Element OD B

Perm Tube ID C

TUF3838 N1 & TUF3838 HRN1

 Milk and Whey Protein Concentration USDA Accepted 3A / FDA Compliant

0.031 (0.79)

73 (6.8)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF3838 N2 & TUF3838 HRN2

0.046 (1.17)

57 (5.3)

38 (965)

3.8 (97)

0.83 (21)

15 (1.0)

TUF6338N1 & TUF6338HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N1 & TUF6438HRN1

0.031 (0.79)

233 (21.6)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N2 & TUF6338HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N2 & TUF6438HRN2

0.046 (1.17)

176 (16.3)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF6338N3 & TUF6338HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (160)

1.138 (28.9)

15 (1.0)

TUF6438N3 & TUF6438HRN3

0.065 (1.65)

137 (12.7)

38 (965)

6.3 (161)

1.138 (28.9)

15 (1.0)

TUF 7838N1

0.031 (0.79)

343 (31.9)

38 (965)

7.73 (196)

1.125 (28.6)

15 (1.0)

TUF8038N1 & TUF8038HRN1

0.031 (0.79)

360 (33.5)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

TUF8038N2 & TUF8038HRN2

0.046 (1.17)

280 (26)

38 (965)

7.9 (201)

1.125 (28.6)

15 (1.0)

For more information, please view/download our “Data Sheet”

Features

Nominal Molecular Weight Cut-off
  • 10,000 Daltons
Product Type
  • Net-Wrapped (no tail), Spiral Wound Element with hydrophillic Polyethersulfone Asymmetric Membrane
  • Developed specifically for maximum retention of milk and whey proteins and maximum capacity
Materials Specifications
  • Feed Spacers and Element Outer-Wrap: Polypropylene
  • Permeate Carrier: Proprietary
  • Adhesives: Proprietary
Operating Limits
  • Maximum Operating Pressure, psi (bar): 140 (9.7)
  • Maximum Operating Temperature, °F (°C): 131 (55)
  • Maximum Cleaning Temperature, °F (°C): 122 (50)
  • Acceptable pH Range (operating) : 2.5-10.0
  • Acceptable pH Range (short-term cleaning) : 1.7-11.5
  • Maximum Chlorine Tolerance (short-term cleaning at pH 11), ppm 180
  • Maximum Pressure Drop per Vessel, psi (bar): 60 (4.0)
  • (Consult Toray for pressure limits when operating above ambient temperature)
Notice:

1. Elements are preserved in sodium meta-bisulfite. Appropriate personal protective equipment should be worn when handling.
2. Toray accepts no responsibility for results obtained by the application of this information or the safety or suitability of Toray’s
products, either alone or in combination with other products. Users are advised to make their own tests to determine the
safety and suitability of each product combination for their own purposes.
3. All data may change without prior notice, due to technical modifications or production changes.
4. Consult Toray for element sizes not shown.
5. Product description;
– 10K: Standard product with good flux and good rejection, across a broad range concentrations
– 10KHR: Used in 10K Systems for highest true protein rejection at good flux

Applications
  • Beverage / Pharmaceuticals
  • Dairy Reverse Osmosis
  • Dairy Nanofiltration
  • Dairy Ultrafiltration
  • Dairy Microfiltration

Docs

Toray TUF 10K Membrane

]]> Toray TSW-440LE Membrane https://aquacomponents.sa/product/toray-tsw-440le-membrane/ Thu, 13 Mar 2025 12:46:10 +0000 https://aquacomponents.sa/product/toray-tsw-440le-membrane/ Cross linked fully aromatic polyamide composite membrane can handle up to 1,200 psi in operating pressure with maximum feed water temperatures up to 113°F (45??.

1. Membrane Type   Cross Linked Fully Aromatic Polyamide Composite
2. Test Conditions Feed Water Pressure Feed
Water Temperature Feed
Water Concentration
Recovery Rate
Feed Water pH		 600 psi (4.14 MPa)
77°F (25°C)
32,000 mg/l Nacl
8%
7
3. Minimum Salt Rejection   99.3%
4. Minimum Product Flow Rate   5,200 gpd (19.6 m³/d) (TSW-400LE)
5,700 gpd (21.5 m³/d) (TSW-440LE)
5. Boron Rejection (typical value)   84% at pH 8 (5 mg/l Boron added to Feed Water)
Models
Specifications:
Type DiameterInch Membrane Area ft² (m²) Salt Rejection% Product Flow Rate gpd(m³/d) Feed Spacer Thickness mil
TSW-440LE 8” 440 (41) 99.60 6,700 (25.3) 28

Features
Operating Limits
  • Maximum Operating Pressure: 1200psi (8.3 MPa)
  • Maximum Feed Water Temperature: 113°F (45°C)
  • Maximum Feed Water SDI15: 5
  • Feed Water Chlorine Concentration: <0.1ppm
  • Feed Water pH Range, Continuous Operation: 2-11
  • Feed Water pH Range, Chemical Cleaning: 1-12
  • Maximum Pressure Drop per Element: 15 psi (0.10 MPa)
  • Maximum Pressure Drop per Vessel: 50 psi (0.34 MPa)

Applications

  • Seawater desalination
  • Municipal drinking water
  • Industrial desalination
Docs
Toray TSW-440LE Membrane Data Sheet
]]> Toray TSW-400LE Membrane https://aquacomponents.sa/product/toray-tsw-400le-membrane/ Thu, 13 Mar 2025 12:46:05 +0000 https://aquacomponents.sa/product/toray-tsw-400le-membrane/
1. Membrane Type   Cross Linked Fully Aromatic Polyamide Composite
2. Test Conditions Feed Water Pressure Feed
Water Temperature Feed
Water Concentration
Recovery Rate
Feed Water pH		 600 psi (4.14 MPa)
77°F (25°C)
32,000 mg/l Nacl
8%
7
3. Minimum Salt Rejection   99.3%
4. Minimum Product Flow Rate   5,200 gpd (19.6 m³/d) (TSW-400LE)
5,700 gpd (21.5 m³/d) (TSW-440LE)
5. Boron Rejection (typical value)   84% at pH 8 (5 mg/l Boron added to Feed Water)
Models
Specifications:
Type DiameterInch Membrane Area ft² (m²) Salt Rejection% Product Flow Rate gpd(m³/d) Feed Spacer Thickness mil
TSW-400LE 8” 400 (37) 99.60 6,100 (23.0) 34

Features
Operating Limits
  • Maximum Operating Pressure: 1200psi (8.3 MPa)
  • Maximum Feed Water Temperature: 113°F (45°C)
  • Maximum Feed Water SDI15: 5
  • Feed Water Chlorine Concentration: <0.1ppm
  • Feed Water pH Range, Continuous Operation: 2-11
  • Feed Water pH Range, Chemical Cleaning: 1-12
  • Maximum Pressure Drop per Element: 15 psi (0.10 MPa)
  • Maximum Pressure Drop per Vessel: 50 psi (0.34 MPa)

Applications

  • Seawater desalination
  • Municipal drinking water
  • Industrial desalination

Docs

Toray TSW-400LE Membrane Data Sheet

]]> Toray TM820K-440 Membrane https://aquacomponents.sa/product/toray-tm820k-440-membrane/ Thu, 13 Mar 2025 12:46:01 +0000 https://aquacomponents.sa/product/toray-tm820k-440-membrane/
1. Membrane Type   Cross Linked Fully Aromatic Polyamide Composite
2. Test Conditions Feed Water Pressure Feed
Water Temperature Feed
Water Concentration
Recovery Rate
Feed Water pH		 800 psi (5.52MPa)
77°F (25°C)
32,000 mg/l Nacl
8%
7
3. Minimum Salt Rejection   99.5%
4. Minimum Product Flow Rate   4,600gpd (17.4m³/d) (TM820K-400)
5,100gpd (19.3m³/d) (TM820K-440)
5. Boron Rejection (typical value)   96% at pH 8 (5mg/l Boron added to Feed water)

Models
Specifications:
Type DiameterInch Membrane Area ft² (m²) Salt Rejection% Product Flow Rate gpd(m³/d) Feed Spacer Thickness mil
TM820K-440 8” 440 (41) 99.86 6,400 (24.2) 28

Features
Operating Limits
  • Maximum Operating Pressure: 1200psi (8.3 MPa)
  • Maximum Feed Water Temperature: 113°F (45°C)
  • Maximum Feed Water SDI15: 5
  • Feed Water Chlorine Concentration: <0.1ppm
  • Feed Water pH Range, Continuous Operation: 2-11
  • Feed Water pH Range, Chemical Cleaning: 1-12
  • Maximum Pressure Drop per Element: 15 psi (0.10 MPa)
  • Maximum Pressure Drop per Vessel: 50 psi (0.34 MPa)

Applications

Docs

Toray TM820K-440 Membrane Data Sheet

]]> Toray TM820K-400 Membrane https://aquacomponents.sa/product/toray-tm820k-400-membrane/ Thu, 13 Mar 2025 12:45:57 +0000 https://aquacomponents.sa/product/toray-tm820k-400-membrane/
1. Membrane Type   Cross Linked Fully Aromatic Polyamide Composite
2. Test Conditions Feed Water Pressure Feed
Water Temperature Feed
Water Concentration
Recovery Rate
Feed Water pH		 800 psi (5.52MPa)
77°F (25°C)
32,000 mg/l Nacl
8%
7
3. Minimum Salt Rejection   99.5%
4. Minimum Product Flow Rate   4,600gpd (17.4m³/d) (TM820K-400)
5,100gpd (19.3m³/d) (TM820K-440)
5. Boron Rejection (typical value)   96% at pH 8 (5mg/l Boron added to Feed water)

Models
Specifications:
Type DiameterInch Membrane Area ft² (m²) Salt Rejection% Product Flow Rate gpd(m³/d) Feed Spacer Thickness mil
TM820K-400 8” 400( 37) 99.86 5,800 (21.9) 34

Features
Operating Limits
  • Maximum Operating Pressure: 1200psi (8.3 MPa)
  • Maximum Feed Water Temperature: 113°F (45°C)
  • Maximum Feed Water SDI15: 5
  • Feed Water Chlorine Concentration: <0.1ppm
  • Feed Water pH Range, Continuous Operation: 2-11
  • Feed Water pH Range, Chemical Cleaning: 1-12
  • Maximum Pressure Drop per Element: 15 psi (0.10 MPa)
  • Maximum Pressure Drop per Vessel: 50 psi (0.34 MPa)

Applications

Docs

Toray TM820k-400 Membrane

]]> Toray TLF-400DG Membrane https://aquacomponents.sa/product/toray-tlf-400dg-membrane/ Thu, 13 Mar 2025 12:45:55 +0000 https://aquacomponents.sa/product/toray-tlf-400dg-membrane/  

1. Membrane Type

 

Cross Linked Fully Aromatic Polyamide Composite

2. Test Conditions

Feed Water Pressure

Feed Water Temperature

Feed Water 

Concentration Recovery Rate

Feed Water pH

150 psi(1.05MPa)

77°F (25°C)

2,000 mg/l NaCl

15%

7

3. Minimum Salt Rejection

 

99.2%

4. Minimum Product Flow Rate

 

9,300gpd (35.2m3/d) (TLF-400DG)
Models
Specifications:

Type

Diameter Inch

Membrane Area ft2(m2)

Salt Rejection %

Product Flow Rate gpd(m3/d)

Feed Spacer Thickness mil

TLF-400DG

8”

400(37)

99.5

11,500(43.5)

34

Features

TM Element Type Features:
  • New membrane types: Ultra low pressure, SWRO High Flux
  • Larger membrane surface area
  • Superior mechanical strength
Operating Limits
  • Maximum Operating Pressure: 600 psi (4.1 MPa)
  • Maximum Feed Water Temperature: 113°F (45??
  • Maximum Feed Water SDI15: 5
  • Feed Water Chlorine Concentration: < 0.1ppm
  • Feed Water pH Range, Continuous Operation: 2-11
  • Feed Water pH Range, Chemical Cleaning: 1-13
  • Maximum Pressure Drop per Element: 15psi (0.10 MPa)
  • Maximum Pressure Drop per Vessel: 50psi (0.34 MPa

Applications

  • Municipal industrial
  • Process water
  • Commercial applications

Docs

Toray TLF-400DG Membrane Data Sheet

]]>