Shelco Filters – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:37:08 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4

Shelco FLD Series Housing https://aquacomponents.sa/product/shelco-fld-series-housing/ Thu, 13 Mar 2025 12:37:08 +0000 https://aquacomponents.sa/product/shelco-fld-series-housing/ Single Cartridge Housings
  • Ideal for commercial and industrial filter application
  • Heavy duty 304L stainless steel construction for maximum durability
  • Accepts 4 1/2″ diameter (Big Blue style) Double Open-End (DOE) cartridges
  • Designed for high temperature and high pressure applications
  • Ring nut closure for quick cartridge change outs
  • Spring loaded knife edge seal provides positive sealing for variable length cartridges
  • Mounting bracket kit included for easy installation
  • Numerous gasket options for compatibility with most fluids
Models
Maximum Operating Pressure
  • 150 psig (10.3 bar) @ 200°F (93°C)
Connections
  • Inlet /Outlet: 1″ FNPT
  • Drain Port: Quick twist fitting
Gaskets
  • Buna N
  • Optional: EPR, Viton
Materials of Construction
  • Head: 304L Stainless Steel
  • Shell: 304L Stainless Steel

Features

Single Cartridge Housings for Large Diameter (BB style) Cartridges

  • Heavy duty 304L stainless steel construction for maximum durability
  • Accepts standard BB style (4 1/2″ diameter) double open-ended cartridges for applications requiring greater dirt holding capacity or higher flow rates
  • Maximum operating pressure is 150 PSI (10 bar) @ 200°F (93°C)
  • Ideal for higher temperatures and pressures versus plastic housings
  • Most efficient and cost-effective choice for commercial and industrial applications
  • Quick-locking ring nut closure for quick and easy cartridge change outs
  • Available in 1″ FNPT in-line fittings for easy installation
  • Knife edge seals with variable spring design to eliminate by-pass and allow for cartridge length variations

Applications
  • Water
  • Desalination
  • Chemicals
  • Food & Beverage
  • Electronics
  • Oil / Gas
  • Air
  • Inks / Paints / Coatings
  • Gases
  • Pulp & Paper

]]> Shelco HTF Filter Bags https://aquacomponents.sa/product/shelco-htf-filter-bags/ Thu, 13 Mar 2025 12:37:08 +0000 https://aquacomponents.sa/product/shelco-htf-filter-bags/ HTF Filter Bags and Construction
Felt Bags:
Filtration felt is a low cost, disposable media with particle retention from 1 to 200 microns. It provides moderate depth filtration and high solids loading capacity. Felt Bags are available in polyester and Polypropylene. The felts are glazed to minimize media migration.
High Efficiency Melt Blown Polypylene Bags:
High efficiency polypropylene bags are constructed of multi-layer media including melt-blown polypropylene media for high particle retention efficiency for more critical applications. The filter bags are rated for 90%, 95% and 99% retention efficiencies.
Monofilament Mesh Bags:
Monofilament mesh is an extremely strong material with precise weaving to ensure consistent pore sizes. It is reusable in many applications. Nylon, polyester and polypropylene media is available with micron ratings from 1-200 microns.
Multifilament Mesh Bags:
Multifilament mesh is a low cost media with micron ratings form 100 to 1500 microns. It is used in applications where the extra strength of a monofilament is not needed. Multifilament bags are available in Polyester only.
Models

Pore Sizes: 1, 3, 5, 10, 2, 50, 75, 100, 150, 200, 250, 300, 400, 600, 800, 1200, 1500 microns

Materials of Construction: 
Bags:
  • Polypropylene felt
  • Polypropylene melt blown
  • Polypropylene Monofilament
  • Polyester felt
  • Polyester Multifilament
  • Nylon Monofilament
  • Oil Absorbent (polypropylene)
Rings:
  • Polypropylene
  • Stainless Steel
  • Steel
Flanges:
  • Polypropylene
Maximum Temperature
  • Polypropylene 180°F (82°C)
  • Polyester 300°F (149°C)
  • Nylon 250°F (121°C)
Bag Sizes
  • #1 7″ Diameter x 16.5″ Length
  • #2 7″ Diameter x 32″ Length
  • #3 4″ Diameter x 8″ Length
  • #4 4″ Diameter x 14″ Length
Recommended Change-out Differential Pressure
  • 20 psid (1.4 bar)
Features
  • Wide variety of styles and materials for most industrial applications
  • Standard #1, #2, #3 and #4 size bags to fit most major manufacturers’ housings
  • Available in 1 to 1500 microns retention ratings
  • High quality felt media provides highest particle retention and largest solids-loading capacity
  • Monofilament mesh media offers precise pore sizes and are suitable for reuse applications
  • Bag seals available with steel, stainless steel or plastic rings or plastic flanges with integral handles for positive sealing
  • Media options include polypropylene, polyester, Nylon, Nomex for high temperatures and Teflon for widest range of chemical compatibility
  • Glazed media finish reduces media migration
  • Heavy duty fiber handles available for easy removal

Applications
  • Paint/Inks
  • Coatings
  • Lubricants
  • Resins
  • Beverages
  • Parts Washers
  • Process Water
  • Pre-filtration
  • Water & Wastewater
  • Chemicals

]]> Shelco 12FOS & 22FOS Series Housing https://aquacomponents.sa/product/shelco-12fos-22fos-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-12fos-22fos-series-housing/
  • Designed for industrial and commercial filtration needs
  • Heavy-duty 304L or 316L stainless steel construction for maximum durability and corrosion resistance
  • V-band clamp or swing bolt closures for quick and easy cartridge change outs and secure sealing
  • Holds 30″ or 40″ cartridge lengths to accommodate a wider ange of flow rates
  • Accepts double open-ended (DOE) style cartridges (222 and 226 style adapters are optional)
  • Knife edge seals eliminate bypass on DOE cartridges
  • Top spring seals allow for cartridge length variations
  • Flange inlet and outlet connections allow for easy piping
  • Equipped with heavy-duty stainless steel mounting legs
    • Models
    Maximum Operating Pressure
    • 150 psig (10.3 bar) @ 300°F (149°C)
    Inlet and Outlet Connections
    • Inlet /Outlet: 3″ (12FOS) and 4″ (22FOS) RF Flanges
    • Drain Ports: 1/2″ FNPT
    • Vent Ports: 1/4″ FNPT (12FOS), 1/2″ FNPT (22FOS)
    • Optional: RF flanges, Sanitary ferrules, MNPT, FNPT, BSP and Grooved fittings.
    Materials of Construction
    • Head and Shell: 304L or 316L Stainless Steel
    • Connections: 304L or 316L Stainless Steel
    • Closure: Clamp: 304L Stainless Steel
    • Swing Bolts: Zinc Plated Steel
    • Vent and Drain Plugs: 304L or 316L Stainless Steel
    • Mounting Legs: 304L Stainless Steel
    Gaskets
    • Buna N (FDA Grade)
    • Optional: EPR, Silicone, Viton or Teflon Encapsulated Silicone
    Finish
    • Poly-coat on exterior surfaces
    • Optional: Electro-polish, Glass bead or Passivate

    Cartridge Type

    • DOE style cartridges (maximum 2 3/4″ diameter
    • for 12FOS and 2 5/8″ diameter for 22FOS series)
    • Optional: 222 and 226 adapters. For 2 3/4″ cartridge 22FOS
    • series holds twenty-one cartridges… order as 21FOS housing.
    Custom Options
    • Gauge Ports or Gauge Ports with Pressure Gauges

    Features
    Multi-Cartridge Housings for Industrial Applications
    • Heavy-duty 304L or 316L Stainless Steel construction with Band Clamp or Swing Bolt Closure for maximum durability
    • Holds twelve (12) or twenty-two (22) cartridges to service a wide range of flow rates
    • Accepts standard double-open-ended (DOE) style cartridges (222 or 226 style adapters optional)
    • Maximum operating pressure: 150 PSI (10 bar) @ 300ºF (149ºC)
    • Inlet and outlet connections: 3″ flange (12FOS) and 4″ flange (22FOS) (sanitary (TC), BSP, grooved or other pipe fitting options available)
    • Equipped with heavy-duty stainless steel mounting legs
    • Exterior surface finish: Poly-coat over stainless steel (electropolish, other surface finishes are optional)

    Applications
    • Water
    • Desalination
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil/Gas
    • Power
    • Inks/Paints/Coatings
    • Coolants
    • Pulp & Paper

    ]]>         Shelco 7FOS Series Housing https://aquacomponents.sa/product/shelco-7fos-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-7fos-series-housing/ Uses for Shelco 7FOS Series Housing
    • Designed for industrial and commercial filtration needs
    • Heavy-duty 304L or 316L stainless steel construction for maximum durability and corrosion resistance
    • V-band clamp or swing bolt closures for quick and easy cartridge change outs and secure sealing
    • Holds seven cartridges between 10″ to 40″ lengths for optimal choice of flow rates
    • Universal seats accept DOE and 222 style cartridges (226 cartridge connectors are optional)
    • Knife edge seals eliminate bypass on DOE cartridges
    • Adjustable top plate accepts variable length cartridges
    • Stainless steel mounting legs
    • Wide range of options to meet specific filtration and nstallation requirements
    Models
    Maximum Operating Pressure
    • 150 psig (10.3 bar) @ 300°F (149°C)
    Inlet and Outlet Connections
    • Inlet /Outlet: 2″ MNPT
    • Drain Ports: 1/2″ FNPT
    • Vent Ports: 1/4″ FNPT
    • Optional: MNPT, FNPT and BSP fittings, RF flanges, Sanitary ferrules and Grooved fittings
    Materials of Construction
    • Head and Shell: 304L or 316L Stainless Steel
    • Connections: 304L or 316L Stainless Steel
    • Closure: Clamp: 304L Stainless steel
    • Swing Bolts: Zinc Plated Steel
    • Vent and Drain Plugs: 304L or 316L Stainless Steel
    • Mounting Legs: 304L Stainless Steel
    Gaskets
    • Buna N (FDA Grade)
    • Optional: EPR, Silicone, Viton or Teflon
    • Encapsulated Silicone
    Finish
    • Poly-coat on exterior surfaces
    • Optional: Electro-polish, Glass bead or Passivate
    Cartridge Type
    • DOE or 222 cartridges (maximum 2 3/4″ OD)
    • Optional: 226 adapters
    Custom Options
    • – Gauge Ports or Gauge Ports with Pressure Gauges
    • – Heavy Duty Mounting Legs
    See Ordering Guide for complete selection of options

    Features
    Multi-Cartridge Housings for Commercial / Light Industrial Applications
    • Heavy duty 304L or 316L Stainless Steel construction with Band Clamp or Swing Bolt Closure for maximum durability
    • Holds seven (7) cartridges to service a wide range of flow rates
    • Universal cartridge connectors accept standard double-open-ended (DOE) style cartridges or 222 style cartridges with flat or fin closed ends (226 style adapters optional)
    • Maximum operating pressure: 150 PSI (10 bar) @ 300ºF (149ºC)
    • Inlet and outlet connections: 2″ MNPT (flanged, sanitary (TC), BSP and other options available)
    • Equipped with stainless steel mounting legs
    • Exterior surface finish: Poly-coat over stainless steel (electropolish, other surface finishes are optional)

    Applications
    • Water
    • Desalination
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil/Gas
    • Power
    • Inks/Paints/Coatings
    • Coolants
    • Pulp & Paper
    ]]>         Shelco 4FOS & 5FOS Series Housing https://aquacomponents.sa/product/shelco-4fos-5fos-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-4fos-5fos-series-housing/
  • Designed for general purpose industrial and commercial filtration needs
  • Heavy-duty 304L or 316L stainless steel construction for maximum durability and corrosion resistance
  • V-band clamp or swing bolt closures for quick and easy cartridge change outs and secure sealing
  • Holds four or five cartridges from 10” to 40” lengths for optimal choice of flow rates
  • Accepts double open-ended (DOE) style cartridges (222 and 226 style adapters are optional)
  • Knife edge seals eliminate bypass on DOE cartridge
  • Adjustable top plate accepts variable length cartridges
  • Wide range of options to meet specific filtration and installation requirements
    • Models
    Maximum Operating Pressure
    • 150 psig (10.3 bar) @ 300°F (149°C)
    Inlet and Outlet Connections
    • Inlet /Outlet: 2″ MNPT
    • Drain Ports: 1/2″ FNPT
    • Vent Ports: 1/4″ FNPT
    • Optional: MNPT, FNPT and BSP fittings, RF flanges, Sanitary ferrules and Grooved fittings
    Materials of Construction
    • Head and Shell: 304L or 316L Stainless Steel
    • Connections: 304L or 316L Stainless Steel
    • Closure: Clamp: 304L Stainless steel
    • Swing Bolts: Zinc Plated Steel
    • Vent and Drain Plugs: 304L or 316L Stainless Steel
    Gaskets
    • Buna N (FDA Grade)
    • Optional: EPR, Silicone, Viton or Teflon
    • Encapsulated Silicone
    Finish
    • Poly-coat on exterior surfaces
    • Optional: Electro-polish, Glass bead or Passivate
    Cartridge Type
    • DOE style cartridges (maximum 2 3/4″ OD)
    • Optional: 222 and 226 adapters
    Custom Options
    • -Gauge Ports or Gauge Ports with Pressure Gauges
    • -Mounting Tabs, Mounting Legs or Heavy Duty Mounting Legs

    Features
    Multi-Cartridge Housings for Light Commercial Applications
    • Heavy duty 304L or 316L Stainless Steel construction with Band Clamp or Swing Bolt Closure for maximum durability
    • Holds four (4) or five (5) cartridges to service a wide range of flow rates
    • Accepts double-open-ended style cartridges (222 and 226 style adapters optional)
    • Maximum operating pressure: 150 PSI (10 bar) @ 300ºF (149ºC)
    • Inlet and outlet connections: 2″ MNPT (flanged, sanitary (TC), BSP and other options available)
    • Exterior surface finish: Poly-coat over stainless steel (electropolish, other surface finishes are optional)

    Applications
    • Water
    • Desalination
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil / Gas
    • Power
    • Inks / Paints / Coatings
    • Coolants
    • Pulp & Paper

    ]]>         Shelco BFS Series Housing https://aquacomponents.sa/product/shelco-bfs-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-bfs-series-housing/ Uses of BFS Series
    • Designed for high flow industrial and commercial filter applications
    • 304L or 316L Stainless Steel Construction for maximumdurability
    • 2BFS housings with Clamp Closure 
    • 2BFS through 6BFS with Swing Bolt Closure
    • Optional 134 epoxy coating for seawater or corrosive applications
    Models

    Model

    Closure

    		 Flow Rate
    GPM (LPM)    		 Dimensions
    A B C D E F G H I J
    2BFS-2C Clamp 350 (1325) 49 9/16″ (125.9) 39 1/8″ (99.4) 16″ (40.6) 10 1/2″ (26.7) 4 1/8″ (10.5) 11 5/8″ (29.5) 13 5/8″ (34.6) 10 9/16″ (26.8) 20 1/2″ (52.1) 20 15/16″ (53.2)
    2BFS-2SB Swing Bolt 350 (1325) 49 9/16″ (125.9) 39 1/8″ (99.4) 16″ (40.6) 10 1/2″ (26.7) 3 11/16″ (9.4) 10″ (25.4) 6 7/8″ (17.5) 10 9/16″ (26.8) 20 1/2″ (52.1) 20 15/16″ (53.2)
    3BFS-2SB Swing Bolt 3 525 (1987) 52 7/8″ (134.3) 41 1/16″ (104.3) 20″ (50.8) 10 3/4″ (27.2) 3 1/4″ (8.3) 10″ (25.4) 6 1/4″ (15.9) 12 5/16″ (31.3) 22 5/8″ (57.5) 25″ (63.5)
    4BFS-2SB Swing Bolt 3 700 (2650) 61 1/4″ (155.6) 40 1/2″ (102.9) 20″ (50.8) 11 1/4″ (28.6) 3 1/4″ (8.3) 10″ (25.4) 8″ (20.3) 12 7/8″ (32.7) 26 1/16″ (66.2) 25″ (63.5)
    5BFS-2SB Swing Bolt 3 700 (3312) 63 1/2″ (161.3) 42″ (106.7) 24″ (61.0) 13 3/8″ (34.0) 4″ (10.2) 10″ (25.4) 7 1/4″ (18.4) 15 3/8″ (39.0) 30″ (76.2) 29″ (73.7)
    6BFS-2SB Swing Bolt 3 1050 (3975) 63 1/2″ (161.3) 42″ (106.7) 24″ (61.0) 13 3/8″ (34.0) 4″ (10.2) 10″ (25.4) 7 1/4″ (18.4) 15 3/8″ (39.0) 30″ (76.2) 29″ (73.7)
    Features
    Maximum Operating Pressure
    • 150 psig (10.3 bar) @ 250°F (121°C) – Clamp closure
    • 150 psig (10.3 bar) @ 300°F (149°C) – Swing bolt closure
    Connections Inlet /Outlet
    • 3″ RF Flanges (2BFS)
    • 4″ RF Flanges (3BFS, 4BFS)
    • 6″ RF Flanges (5BFS and 6BFS)
    • Optional: RF Flanges or Sanitary Ferrules
    Drain Port
    • 1/2″ FNPT (2BFS-2C)
    • 3/4″ FNPT (2BFS-2SB – 6BFS-2SB)
    • Vent Port: 1/2″ FNPT
    • Gauge Ports: 1/4″ FNPT

    Materials of Construction
    • Head / Shell: 304L or 316L Stainless Steel
    • Eye Nuts and Davit Handle: Zinc Plated Steel
    • Mounting Legs: 304L Stainless Steel
    Gaskets
    • Buna N
    • Optional: EPR, Silicone, Teflon Encapsulated Silicone, Viton
    Baskets
    • 1/8″ perforated Stainless Steel
    • Optional: Various perforation and mesh sizes
    Finish
    • Poly-coat on exterior surfaces
    • Optional: 134 coating or electro-polish

    Applications
    • Water
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil
    • Inks/Paints/Coatings
    • Coolants
    • Pulp & Paper

    ]]>         Shelco BF Series Housing https://aquacomponents.sa/product/shelco-bf-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-bf-series-housing/ Uses For BF Series
    • Designed for industrial and commercial filter applications
    • Heavy duty construction for maximum durability
    • 1/8″ perforated stainless steel basket (optional perforations and mesh sizes available)
    • #1 and # 2 Size Housings: Available in 316L Stainless Steel, 304L Stainless Steel or Carbon Steel construction for a wide range of chemical compatibility, Clamp or Swing Bolt closures, stainless steel compression spring provides positive bag sealing, adjustable stainless steel leg assembly, 1/4″ FNPT gauge ports and 1/2″ FNPT drain port
    • #3 and #4 Size Housings: 316 Stainless Steel construction, Clamp closure for easy bag change outs, optional compression spring and adjustable mounting legs.
    Models
    Model Closure Bag
    Size    		 Flow Rate
    GPM    		 Std Pipe
    Size    		 Drain Vent Shipping
    Weight Clamp    		 Box Size
    Clamp    		 Shipping
    Weight SB    		 Box Size
    Swing Bolt
    BFS-3C Clamp #3 30 1.5″ FNPT – 1/4″ NPT 10 lbs 7x7x18 – –
    BFS-4C Clamp #4 60 1.5″ FNPT – 1/4″ NPT 14 lbs 7x7x28 – –
    BFS-1 Clamp or Swing Bolt #1 100 2″ FNPT 1/2″ NPT 1/4″ NPT 43 lbs 18x18x38 73 lbs 18x18x42
    BFS-2 Clamp or Swing Bolt #2 180 2″ FNPT 1/2″ NPT 1/4″ NPT 53 lbs 18x18x45 83 lbs 18x18x50
    BFC-1 Clamp or Swing Bolt #1 100 2″ FNPT 1/2″ NPT 1/4″ NPT 45 lbs 18x18x38 73 lbs 18x18x42
    BFC-2 Clamp or Swing Bolt #2 180 2″ FNPT 1/2″ NPT 1/4″ NPT 55 lbs 18x18x45 83 lbs 18x18x50

    Features
    Maximum Operating Pressure
    • 150 psig (10.3 bar) @ 300°F (149°C)
    Connections
    • Inlet /Outlet:
    • 2″ FNPT (#1 and #2 Sizes)
    • 3/4″, 1″ and 1 1/2″ FNPT (#3 and #4 Sizes)
    • Optional: RF Flanges or Sanitary Ferrules
    • Drain Port: 1/2″ FNPT (#1 and #2 Sizes)
    • Gauge Ports: 1/4″ FNPT – clean and dirty sides (#1 and #2 sizes)
    • Vent Port: 1/4″ NPT Plug
    Gaskets
    • Buna N
    • Optional: EPR, Silicone, Teflon Encapsulated Silicone, Viton
    Baskets
    • 1/8″ perforated stainless steel
    • Options: various perforation and mesh sizes
    Materials of Construction
    • Head / Shell:
    • #1 and #2 Sizes
    • 316L Stainless Steel, 304L Stainless Steel, Carbon Steel
    • #3 and #4 Sizes
    • 316L Stainless Steel
    • Eye Nuts: Zinc plated steel
    • Mounting Legs: 304L Stainless Steel
    Options
    • – Side Inlet / Side Outlet (#1 and #2 sizes)
    • – 134 epoxy coating for seawater and corrosive applications
    See ordering guide for complete selection of options

    Applications
    • Water
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil
    • Inks/Paints/Coatings
    • Coolants
    • Pulp & Paper

    ]]>         Shelco FAS & FAC Series Housing https://aquacomponents.sa/product/shelco-fas-fac-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-fas-fac-series-housing/ Uses for Single Cartridge Housings
    • Designed for industrial and commercial filter applications
    • Heavy duty construction for maximum durability
    • Various materials of construction for wide range of process requirements

                -304L or 316L stainless steel
                -304L SS body
                -Cast Iron Head with a steel body

    • Accepts Double Open-End (DOE) cartridges
    • Available with 1/4″, 3/8″, 1/2″, 3/4″, and 1″ connections.
    • Numerous gasket options for compatibility with most fluids
    • Bolt-nut-closure design for quick cartridge change outs (T-handle optional)
    • In line connections for easy installation
    • Knife edge seals at both end of cartridge housing eliminate potential bypass.
     
    Models
    Maximum Operating Pressure
    • 250 psig (17 bar) @ 275°F (135°C)
    • 125 psig (8.6 bar) @ 200°F (93.3°C): FAC-15 Series
    Connections
    • Inlet /Outlet: 1/2″, 3/4″ or 1″ FNPT
    • 1/4″ and 3/8″ only available for FAC Series
    • Optional: RF Flanges, Sanitary Ferrules, BSP
    • Drain Port: 1/8″ NPT (1/4″ for FO-38 models)
    Gaskets
    • Buna
    • Optional: EPR, Silicone, Viton, Teflon, Neoprene, Vellumoid
    Materials of Construction
    • Head / Shell: FAS – 304L or 316L Stainless Steel
    • FAC – Cast iron head / carbon steel
    • Drain: FAS – Stainless Steel Plug
    • FAC – Brass Petcock
    Options
    • Vent Port with Vent Screw
    • Gauge Ports
    • Bracket Kit
    • Variable Spring Load Seal
    • Tee Handle
    See Ordering Guide for complete selection of options

    Features

    Single Cartridge Housings with Bolt & Nut Closure for Double Open Ended Cartridges for Air and Gas Applications.

    • 304L or 316L Stainless Steel, Brass Nickel Plated Head with 304L Stainless Steel Body or Cast Iron Head with a Steel Body – Heavy duty construction for durability
    • Maximum operating pressure: 250 PSI (17 bar) @ 275°F (135°C).
    • Available in 1/4″, 3/8″, 1/2″, 3/4″, and 1″ connection sizes. connection sizes
    • Wide variety of gasket options for compatibility with almost any fluid
    • Designed for industrial and commercial filtration needs
    • Simple Bolt & Nut closure for quick cartridge change outs (T-handle optional)
    • In line fittings for easy installation (standard FNPT, flanged, sanitary (TC) or BSP connections)
    • Knife edge seal provides positive sealing of double-open-ended cartridges

    Applications
    • Water
    • Desalination
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil/Gas
    • Air
    • Inks/Paints/Coatings
    • Gases
    • Pulp & Paper

    ]]>         Shelco CSF Series Housing https://aquacomponents.sa/product/shelco-csf-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-csf-series-housing/ Single Cartridge Housings
    • Designed for industrial and commercial filter applications
    • Heavy duty construction for maximum durability
    • 316L Stainless Steel construction with cast head and electro-polished sump suitable for a wide range of process requirements
    • Accepts 222 or 226 connector cartridges with Fin or Flat ends
    • Available with 3/4″, and 1″ in-line connections for easy installation
    • Ring nut closure for quick cartridge change outs
    • Equipped with mounting bracket kit and wrench
    • Numerous gasket options for compatibility with most fluids
    Models
    Maximum Operating Pressure
    • 300 psig (20.7 bar) @ 200°F (93°C)
    Connections
    • Inlet /Outlet: 3/4″ or 1″ FNPT
    • Optional: BSPT, BSPP, RF Flanges, Sanitary Ferrules or Grooved Fittings
    • Drain Port: 1/4″ NPT Plug
    Materials of Construction
    • Head / Shell: 316L Stainless Steel
    Gaskets
    • Buna N
    • Optional : EPR, Silicone, Viton
    Options
    • Gauge Ports
    • Vent Port with Vent Screw
    See Ordering Guide for complete selection of options

    Features
    Single Cartridge Housings with Ring Nut Closure for Single Open-Ended Cartridges
    • Ideal for High Purity commercial and industrial applications
    • Accepts Single Open-Ended cartridges with 222 or 226 style connectors
    • Heavy duty 316L stainless steel construction for maximum durability
    • Maximum operating pressure is 300 PSI (20 bar) @ 200°F (93°C)
    • Quick-locking ring nut closure for easy cartridge change outs
    • Available in 3/4″ and 1″ connection sizes
    • Wide variety of gasket options for compatibility with almost any fluid
    • In line fittings for easy installation (standard FNPT, flanged, sanitary (TC) or BSP connections)
    • Includes mounting bracket kit and rod (for opening & closing) 

    Applications
    • Water
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil
    • Inks / Paints / Coatings
    • Coolants
    • Pulp & Paper

    ]]>         Shelco FOS, FOSBN & FOC Series Housing https://aquacomponents.sa/product/shelco-fos-fosbn-foc-series-housing/ Thu, 13 Mar 2025 12:37:07 +0000 https://aquacomponents.sa/product/shelco-fos-fosbn-foc-series-housing/ Uses for FOS, FOSBN, FOC Series
    • Designed for industrial and commercial filter applications
    • Heavy duty construction for maximum durability
    • Various materials of construction for wide range of process requirements (304L or 316L stainless steel, Brass nickel plated head with 304L SS body, Cast Iron Head with a steel body)
    • Accepts Double Open-End (DOE) cartridges
    • Available with 1/4″, 3/8″, 1/2″, 3/4″, and 1″ connections.
    • Numerous gasket options for compatibility with most fluids
    • Bolt-nut-closure design for quick cartridge change outs (T-handle optional)
    • In line connections for easy installation
    • Knife edge seals at both end of cartridge housing eliminate potential bypass.
    Models
    Maximum Operating Pressure
    • 250 psig (17 bar) @ 275°F (135°C)
    Connections
    • Inlet /Outlet: 1/2″, 3/4″ or 1″ FNPT
    • 1/4″ and 3/8″ only available for FOC Series
    • Optional: BSPT, BSPP, RF Flanges, Sanitary Ferrules or Grooved Fittings
    • Drain Port: 1/8″ NPT (1/4″ for FO-38 models)
    Gaskets
    • Buna
    • Optional: EPR, Silicone, Viton, Teflon, Neoprene, Vellumoid
    Materials of Construction
    • Head / Shell: FOS – 304L or 316L Stainless Steel
    • FOSBN – Brass nickel plated / 304L Stainless Steel
    • FOC – Cast iron head / carbon steel
    • Drain: FOS – Stainless Steel Plug
    • FOSBN – Brass Petcock
    • FOC – Brass Petcock
    Options
    • Vent Port with Vent Screw
    • Gauge Ports
    • Bracket Kit
    • Variable Spring Load Seal
    • Tee Handle
    See Ordering Guide for complete selection of options

    Features

    Single Cartridge Housings with Bolt & Nut Closure for Double Open Ended Cartridges for Liquid Applications

    • 304L or 316L Stainless Steel, Brass Nickel Plated Head with 304L Stainless Steel Body or Cast Iron Head with a Steel Body – Heavy duty construction for durability
    • Maximum operating pressure: 250 PSI (17 bar) @ 275°F (135°C).
    • Available in 1/4″, 3/8″, 1/2″, 3/4″, and 1″ connection sizes
    • Wide variety of gasket options for compatibility with almost any fluid
    • Designed for industrial and commercial filtration needs
    • Simple Bolt & Nut closure for quick cartridge change outs (T-handle optional)
    • In-line fittings for easy installation (standard FNPT, flanged, sanitary (TC) or BSP connections)
    • Knife edge seal provides positive sealing of double-open-ended cartridges

    Applications
    • Water
    • Desalination
    • Chemicals
    • Food & Beverage
    • Electronics
    • Oil/Gas
    • Air
    • Inks/Paints/Coatings
    • Gases
    • Pulp & Paper

    ]]>