Maximum Operating Pressure

• 150 psig (10.3 bar) @ 200°F (93°C)

Connections

• Inlet /Outlet: 1″ FNPT
• Drain Port: Quick twist fitting

Gaskets

• Buna N
• Optional: EPR, Viton

Materials of Construction

• Head: 304L Stainless Steel
• Shell: 304L Stainless Steel

Single Cartridge Housings for Large Diameter (BB style) Cartridges

• Heavy duty 304L stainless steel construction for maximum durability
• Accepts standard BB style (4 1/2″ diameter) double open-ended cartridges for applications requiring greater dirt holding capacity or higher flow rates
• Maximum operating pressure is 150 PSI (10 bar) @ 200°F (93°C)
• Ideal for higher temperatures and pressures versus plastic housings
• Most efficient and cost-effective choice for commercial and industrial applications
• Quick-locking ring nut closure for quick and easy cartridge change outs
• Available in 1″ FNPT in-line fittings for easy installation
• Knife edge seals with variable spring design to eliminate by-pass and allow for cartridge length variations

• Water
• Desalination
• Chemicals
• Food & Beverage
• Electronics
• Oil / Gas
• Air
• Inks / Paints / Coatings
• Gases
• Pulp & Paper

Filtration felt is a low cost, disposable media with particle retention from 1 to 200 microns. It provides moderate depth filtration and high solids loading capacity. Felt Bags are available in polyester and Polypropylene. The felts are glazed to minimize media migration.

High efficiency polypropylene bags are constructed of multi-layer media including melt-blown polypropylene media for high particle retention efficiency for more critical applications. The filter bags are rated for 90%, 95% and 99% retention efficiencies.

Monofilament mesh is an extremely strong material with precise weaving to ensure consistent pore sizes. It is reusable in many applications. Nylon, polyester and polypropylene media is available with micron ratings from 1-200 microns.

Multifilament mesh is a low cost media with micron ratings form 100 to 1500 microns. It is used in applications where the extra strength of a monofilament is not needed. Multifilament bags are available in Polyester only.

Pore Sizes: 1, 3, 5, 10, 2, 50, 75, 100, 150, 200, 250, 300, 400, 600, 800, 1200, 1500 microns

Materials of Construction: 

Bags:

• Polypropylene felt
• Polypropylene melt blown
• Polypropylene Monofilament
• Polyester felt
• Polyester Multifilament
• Nylon Monofilament
• Oil Absorbent (polypropylene)

Rings:

• Polypropylene
• Stainless Steel
• Steel

Flanges:

• Polypropylene

Maximum Temperature

• Polypropylene 180°F (82°C)
• Polyester 300°F (149°C)
• Nylon 250°F (121°C)

Bag Sizes

• #1 7″ Diameter x 16.5″ Length
• #2 7″ Diameter x 32″ Length
• #3 4″ Diameter x 8″ Length
• #4 4″ Diameter x 14″ Length

Recommended Change-out Differential Pressure

• 20 psid (1.4 bar)

• Wide variety of styles and materials for most industrial applications
• Standard #1, #2, #3 and #4 size bags to fit most major manufacturers’ housings
• Available in 1 to 1500 microns retention ratings
• High quality felt media provides highest particle retention and largest solids-loading capacity
• Monofilament mesh media offers precise pore sizes and are suitable for reuse applications
• Bag seals available with steel, stainless steel or plastic rings or plastic flanges with integral handles for positive sealing
• Media options include polypropylene, polyester, Nylon, Nomex for high temperatures and Teflon for widest range of chemical compatibility
• Glazed media finish reduces media migration
• Heavy duty fiber handles available for easy removal

• Paint/Inks
• Coatings
• Lubricants
• Resins
• Beverages
• Parts Washers
• Process Water
• Pre-filtration
• Water & Wastewater
• Chemicals