The Series T7 is controlled by a 7-day programmable timer. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous ‘ON’ mode and the ability to adjust the stroke length from 0-100%.

There is no need for a separate timer. All timer functions are integrated into the pump eliminating the expense of purchasing an installing another piece of equipment. The event-based timer allows the Series T7 to be used for a wide variety of timed applications. The guided check valves with the proven seat and ball designs make the PULSAtron the most reliable metering pumps in the world. PULSAtron pumps are know for excellent suction lift characteristics resulting in highly dependable chemical additions.

Ten distinct models are available, having pressure capabilities to 250 psig (17 bar), and flow capacities to 58 gpd (9.1 lph), with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series A Pumps

Series A Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat.A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 cps.

Agency Approved and water resistant for demanding outdoor and indoor applications. Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, CSPE a generic formulation of Hypalon^®, Viton^®, ceramic, alloys and 316SS.

Four distinct models are available, having pressure capabilities to 80 psgi (5.6 bar), and flow capacities to 30 gpd (4.7 lph), with a turndown ration of 10:1. Metering performance is reproducible to within +/- 3% of maximum capacity. Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series C Pumps

Series C pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat. A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 cps.

Agency Approved and water resistant for demanding outdoor and indoor applications. Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, CSPE a generic formulation of Hypalon^®, Viton^®, ceramic, alloys, and 316SS

The Series C Plus offers four distinct models with pressure capabilities to 80 psig, and flow capacities to 30 gpd (4.7 lph), with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series C Plus

Series C Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat.A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 cps.

Agency Approved and water resistant for demanding outdoor and indoor applications. Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, CSPE a generic formulation of Hypalon^®, Viton^®, ceramic, alloys, and 316SS.

Series E is internally dampened to reduce noise which makes it very acceptable for household installations. It is also water resistant to accommodate outdoor installations as well. It features guided ball check valve systems to reduce back flow and enhance outstanding priming characteristics. Series E also offers few moving parts and is easily wall mountable.

Nineteen distinct models are available, having pressure capabilities to 300 psig (21 bar) @ 3 gpd (0.5 lph) and flow capacities to 600 gpd @ 30 psig (2 bar), with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity. Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series E pumps continue to meet their specifications for pressure and capacity even during extended use. It also features safe and easy priming with durable leak-free bleed valve assembly.

Series ET Components

• There are two time ranges – either 2 to 200 seconds or 12 to 20 minutes. The setting is made by selecting a time base value (200 seconds or 20 minutes) and then setting the time base percentage from 1 to 100%.

• The pump includes both input and output water meter connections at the front panel. The output connection provides an isolated dry contact output of the water meter contact to operate additional pumps or tim ers off the same water meter.

• There is no need for a separate timer. All timer functions are integrated into the pump eliminating the expense of purchasing an installing another piece of equipment.

• There are no complicated menu structures. Simply select the desired mode on the front panel and connect the water meter input.

• There are two selectable time base settings. Choose the time base appropriate for your applications and set the percent value to run the amount of time you desire.

Our guided check valves with the proven seat and ball designees make PULSAtron the most reliable metering pumps in the world. PULSAtron pumps are know for excellent suction lift characteristic resulting in highly dependable chemical additions.

Series HV Capacities & Materials

Five distinct models are available, having pressure capabilities to 150 PSIG @ 24 GPD, and flow capacities to 240 GPD @ 80 PSIG, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 2% maximum capacity. Materials of construction include PVC, Glass Filled Polypropylene and 316SS, with SS and TEF check balls and TFE valve seats. Chemical liquid end materials that can be selected include PVC, PTFE and 316SS.

Series MP features relay output for computer interface or AC power allows for external control. There is a six-button touch pad control with internationally recognized symbols for simplified programming.

There are alarm signals for signal loss, full count, circuit failure, pulse overflow and pulse rate high. Liquid low level indicator capability is standard. Pulse signals can be multiplied or divided by 1 to 999 allowing for pumps to handle peak requirements. Series MP is also equipped with a 16 character dot matrix backlit multi-lingual display that allows for easy reading and user-friendly programming.

Nineteen distinct models are available, having pressure capabilities to 300 psig (21 bar) @ 3 gpd (0.5 lph), and flow capacities to 504 gpd (79.5 bar) @ 20 psig (1.3 bar), with a turndown ratio of 1000:1. Metering performance is reproducible to within +/- 2% maximum capacity.

The PULSAtron Series MP contains an extended two year warranty on the electronic circuit board for trouble free service.

Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset.

Nineteen distinct models are available, having pressure capabilities to 300 psig (21 bar) @ 3 gpd (0.5 lph), and flow capacities to 600 gpd (94.6 lph) @ 30 psig (2 bar), with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 2% of maximum capacity. As with Series E, our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

A variety of chemicals can be pumped by Series E Plus. Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, CSPE a generic formulation of Hypalon^®, Viton^®, ceramic, alloys and 316SS.