Membranes;Parts – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:53:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4

DUPONT SW30XFR??00/34 https://aquacomponents.sa/product/dupont-sw30xfr00-34/ Thu, 13 Mar 2025 12:53:49 +0000 https://aquacomponents.sa/product/dupont-sw30xfr00-34/ DUPONT FORTILIFE CR100i WET https://aquacomponents.sa/product/dupont-fortilife-cr100i-wet/ Thu, 13 Mar 2025 12:53:48 +0000 https://aquacomponents.sa/product/dupont-fortilife-cr100i-wet/ DUPONT FORTILIFE XC70??70 https://aquacomponents.sa/product/dupont-fortilife-xc7070/ Thu, 13 Mar 2025 12:53:48 +0000 https://aquacomponents.sa/product/dupont-fortilife-xc7070/ DUPONT FORTILIFE XC70??00 https://aquacomponents.sa/product/dupont-fortilife-xc7000/ Thu, 13 Mar 2025 12:53:48 +0000 https://aquacomponents.sa/product/dupont-fortilife-xc7000/ DUPONT FORTILIFE XC80??40 https://aquacomponents.sa/product/dupont-fortilife-xc8040/ Thu, 13 Mar 2025 12:53:48 +0000 https://aquacomponents.sa/product/dupont-fortilife-xc8040/ DUPONT FORTILIFE CR100 https://aquacomponents.sa/product/dupont-fortilife-cr100/ Thu, 13 Mar 2025 12:53:45 +0000 https://aquacomponents.sa/product/dupont-fortilife-cr100/ The FilmTec™ Fortilife™ product family offers solutions for industrial-users to improve water efficiency by incorporating membrane and element design innovations that enable systems to clean-less, recover-more, and waste-less.
The FilmTec™ Fortilife™ CR100 Element is an advanced element design for treating and recycling highly biofouling prone waters, such as wastewater. It utilizes an ultra-low pressure drop element design and a durable, fouling resistant, and cleanable membrane chemistry that provides outstanding solute rejection over a long element lifetime. These benefits are available with either standard (CR100) or iLEC™ (CR100i) end cap designs.

Important Information

Proper start-up of reverse osmosis water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock.  Following the proper start-up sequence also helps ensure that system operating parameters conform to design specifications so that system water quality and productivity goals can be achieved.

Before initiating system start-up procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.

Operation Guidelines

Avoid any abrupt pressure or cross-flow variations on the spiral elements during start-up, shutdown, cleaning or other sequences to prevent possible membrane damage. During start-up, a gradual change from a standstill to operating state is recommended as follows:

  • Feed pressure should be increased gradually over a 30-60 second time frame.
  • Cross-flow velocity at set operating point should be achieved gradually over 15-20 seconds.
Models
Specifications
Product Active area ft2 (m2) Feed spacer thickness (mil) Permeate flow rate gpd (m3/d) Stabilized salt rejection (%) Minimum salt rejection (%)
Fortilife CR100 400 (37) 34 11,500 (43.5) 99.7 99.4

Features
  • Up to 10% less energy consumption at the same water productivity.
  • Up to 50% reduction in the number of cleanings.
  • Durable membrane with a cleaning tolerance over a wide pH range (pH 1-13)
    for consistent, long-lasting lifetime.
Operating Limits:
  • Membrane Type Polyamide Thin-Film Composite
  • Maximum Operating Temperature 113°F (45°C)
  • Maximum Operating Pressure 600 psig (41 bar)
  • Maximum Pressure Drop 15 psig (1.0 bar)
  • pH Range, Continuous Operation 2 – 11
  • pH Range, Short-Term Cleaning (30 min.) 1 – 13
  • Maximum Feed Silt Density Index SDI 5
  • Free Chlorine Tolerance<0.1 ppm
Applications
  • Fossil Power Generation
  • Chemical & Petrochemical
  • Steel & Metal
  • Textiles
]]>