Protec 2.5″ End Ported is made with a standard vessel design which incorporates the necessary connections put at the end closer of the vessel head. The models are based on a structure that utilizes durable housing for the membrane filtration process to successfully treat water at any positive pressure of more than 1000 PSI. The high durability of these vessels also ensures effective long-term use, while being able to accommodate hollow fiber elements and anykind of 2.5″ diameter spiral-wound component.

PRO 2.5-1200-EP-21 SPECIFICATIONS

The CodeLineTM 160E Series is a standardized family of fiberglass pressure vessels designed for continuous, long-term use as housings for reverse osmosis, nano-filtration, ultra-filtration and micro-filtration membranes. Any make of a sixteen-inch diameter spiral-wound membrane element is easily accommodated.

The CodeLineTM 160E Series is designed for different pressure ratings. They are unified in design and have maximum number of parts in common. Each model has the appropriate strength and materials of construction to provide years of continuous use in typical service when properly maintained. Each model is available in lengths to house from one to seven 40-inch long membrane elements.

The CodeLineTM 160E Series is designed and built in accordance with the engineering standards of the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME Code). A vessel marked with ASME Code stamp is accepted worldwide as being built to the highest standard of safety.

Each model in the CodeLineTM 160E Series has passed rigorous ASME Code qualification tests, which require that vessels not burst at less than six times their design pressure. Safe use is further assured in that vessels will not fail catastrophically; overpressure is relieved by weeping through the fiberglass shell. Also, every production vessel is hydro-tested to verify structural integrity.

The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. See the “Downloads” page for more information.

The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Models with a PSI of 75-600 purify typical brackish waters while models with a PSI of 1000-1200 purify typical seawater.

See the “Downloads” page for more information.

The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Models with a PSI of 75-600 purify typical brackish waters while models with a PSI of 1000-1200 purify typical seawater. See the “Downloads” page for more information.

The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. See the “Downloads” page for more information.

The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Models with a PSI of 150-600 purify typical brackish waters while models with a PSI of 1000-1200 purify typical seawater. See the “Downloads” page for more information.

The Pure Aqua FRP Membrane Housing RO/UF Pressure Vessel is designed for continuous, long-term use as a housing for reverse osmosis and ultrafiltration elements in typical commercial water treatment systems. Models are available for 300 psi.

The FRP vessels are designed to accommodat  any make of 4-inch nominal diameter spiral-wound element with a 3/4” diameter male product water tube.

The fiberglass shell can be damaged by rigid clamping, impact, scratches or abrasion. Metal parts must be maintained free of corrosion to eliminate potentially

The CodeLine 160S30 Fiberglass RO Pressure Vessel is designed for continuous, long term use as a housing for reverse osmosis membrane elements to desalt typical brackish waters at pressures up to 300 psi. Any make of Sixteen-inch nominal diameter spiral-wound element is easily accommodated; the appropriate interfacing hardware for the element specified is furnished with the vessel.

The CodeLine 160S30 is designed in accordance with the engineering standards of the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME) Code. At small additional cost vessels can be inspected during construction by an ASME Authorized Inspector and ASME Code stamped.