Hydranautics HYDRAsub MAX (MBR) Modules – Aqua Components

HYDRAsub MAX HSMM2400-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:35 +0000

HYDRAsub MAX HSMM2400-ES Membrane has engineered and licensed a special diffuser system to provide controlled aeration installed into the stainless steel frame. These new applications are best suited for applications regarding industrial and municipal wastewater.

Models

	HYDRAsub®MAX- MBR	HSMM2400-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.5 μm 60 (40 m² each) 25824 ft2 (2400 m²) (4)- 3” MNPT (4)- 2” MNPT (2)- To fit 3” pipe 3636 lbs (1652 kg) 5634 lbs (2555 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM2400-ES Membrane utilzies cutting-edge features to further improve the working processes of industrial and municipal wastewater projects.

Docs

HYDRAsub MAX HSMM2400-ES Membrane Data Sheet

HYDRAsub MAX HSMM1600-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:29 +0000

HYDRAsub MAX HSMM1600-ES Membrane was engineered and patented with a special diffuser system for controlled aeration built into the stainless steel enclosure. These new applications are ideal for processes regarding the treatment of wastewater, along with many other uses.

Models

	HYDRAsub®MAX- MBR	HSMM1600-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.5 μm 40 (40 m² each) 17,216 ft2 (1600 m²) (2)- 3” MNPT (2)- 3” MNPT (2)- To fit 3” pipe 2460 lbs (1118 kg) 4226 lbs (1916 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM1600-ES Membrane utilzies cutting-edge features to improve the performance of municipal and industrial wastewater applications, including chemical, textile, food and beverage, palm oil applications, etc.

Docs

HYDRAsub MAX HSMM1600-ES Membrane Data Sheet

HYDRAsub MAX HSMM1200-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:23 +0000

HYDRAsub MAX HSMM1200-ES Membrane is designed with hollow fiber PVDF submersed modules to work specifically for MBR applications. MBR, and particularly HYDRAsub ®, produces high purity water that is ideal for reverse osmosis as opposed to conventional activated sludge treatment. Thus, significantly reducing footprint at higher MLSS.

Models

	HYDRAsub®MAX- MBR	HSMM1200-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.5 μm 30 (40 m² each) 12,912 ft2 (1200 m²) (2)- 3” MNPT (2)- 2” MNPT (2)- To fit 3” pipe 1762 lbs (801 kg) 3400 lbs (1543 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM1200-ES Membrane is designed for municipal and industrial wastewater applications (chemical, textile, food and beverage or palm oil applications among many others).

Docs

HYDRAsub MAX HSMM1200-ES Membrane Data Sheet

HYDRAsub MAX HSMM800-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:17 +0000

In comparison with conventional activated sludge treatment, MBR and particularly HYDRAsub ® generate excellent-quality product water acceptable for reverse osmosis processes. HYDRAsub MAX HSMM800-ES Membrane dramatically reduces footprint by removing sedimentation tank and service at greater Mixed Suspended Liquor Solids (MLSS).

Models

	HYDRAsub®MAX- MBR	HSMM800-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.05 μm 20 (40 m² each) 8608 ft2 (800 m²) (2)- 2” MNPT Connections (2)- 2” MNPT Connections (2)- To fit 3” pipes 1197 lbs (544 kg) 1880 lbs (853 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM800-ES Membrane uses advanced features to further enhance the working processes of industrial and municipal wastewater projects.

Docs

HYDRAsub MAX HSMM800-ES Membrane Data Sheet

HYDRAsub MAX HSMM600-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:11 +0000

HYDRAsub MAX HSMM600-ES Membrane incorporates an ultrafiltration fiber that consists of a pore size of 0.05 µm. The proposed size of the modules varies between 40 and 2400 m2.
The product’s main features are a high flux operation, a reduced footprint condition, a quite straightforward method and highly durable material for an extended service life.

Models

	HYDRAsub®MAX- MBR	HSMM600-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.05 μm 15 (40 m² each) 6456 ft2 (600 m²) (2)- 2” MNPT Connections (2)- 2” MNPT Connections (2)- To fit 3” pipes 837 lbs (381 kg) 11631 lbs (740 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM600-ES Membrane uses top-notch features to greatly enhance the working processes of industrial and municipal wastewater projects.

Docs

HYDRAsub MAX HSMM600-ES Membrane Data Sheet

HYDRAsub MAX HSMM400-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:06 +0000

HYDRAsub MAX HSMM400-ES Membrane has earned recognition around the world as the technology of preference for handling industrial and municipal wastewater. This HYDRAsub ® MBR module delivers a reduced footprint and preferable effluent quality in an easy to use and maintain design.

Models

	HYDRAsub®MAX- MBR	HSMM400-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.5 μm 10 (40 m² each) 4304 ft2 (400 m²) (2)- 2” MNPT (2)- 2” MNPT (2)- To fit 3” pipes 587 lbs (267 kg) 1406 lbs (637 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM400-ES Membrane features first-rate technology to further enhance industrial and municipal wastewater operating processes.

Docs

HYDRAsub MAX HSMM400-ES Membrane Data Sheet

HYDRAsub MAX HSMM200-ES Membrane

aqua@2025 — Thu, 13 Mar 2025 12:43:00 +0000

HYDRAsub MAX HSMM200-ES Membrane was engineered for MBR applications through a hollow fiber PVDF submersed module design. MBR, as well as HYDRAsub ®, delivers top-notch permeate water ideal for reverse osmosis applications.

Models

	HYDRAsub®MAX- MBR	HSMM200-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.5 μm 5 (40 m² each) 2152 ft2 (200 m²) (2)- 2” MNPT (2)- 1 1/2” MNPT (2)- to fit 2.5” pipes 360 lbs (164 kg) 502 lbs (227 kg)
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d

Features

Maximum Trans Membrane Pressure (Vacuum): -6 psig (-0.41 bar)
Maximum Backwash Trans Membrane Pressure: 2 psig (0.14 bar)
Maximum Instantaneous Chlorine Concentration: 5,000 ppm^a
Maximum Chlorine Tolerance: 742,000 ppm-hrs^b
MLSS Range: 8,000 – 12,000 mg/L^c
Operating Temperature Range: 41 – 104°F (5 – 40° C)
Feed Water pH Range: 6.0 – 8.0
Cleaning pH Range: 1.0 – 11.0
Operating Mode: Outside to Inside

Applications

HYDRAsub MAX HSMM200-ES Membrane uses state-of-the-art technology to further optimize the processes of industrial and municipal wastewater projects.

Docs

HYDRAsub MAX HSMM200-ES Membrane Data Sheet