Hydranautics 8″ Seawater Membranes – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:38:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1

Hydranautics SWC4B-LD Membrane https://aquacomponents.sa/product/hydranautics-swc4b-ld-membrane/ Thu, 13 Mar 2025 12:38:53 +0000 https://aquacomponents.sa/product/hydranautics-swc4b-ld-membrane/ SWC4B membranes use the same polymer chemistry as SWC4 offering highest rejection including boron. SWC4B-LD and SWC4B MAX membranes are used in the production of potable waters when the permeate boron concentration is critical.They do not need the second pass thus reducing capital costs.

SWC4B-LD membranes use patented Low Differential LD™ technology designed to minimize colloidal fouling. They use a patented 34 mil thickness feed spacer that prevents colloidal fouling and increases the effectiveness of membrane cleaning.

As a result, the SWC4-LD membrane does not need to be cleaned frequently – thus reducing treatment cost – while offering extreme durability and consistent performance.

Models

SWC4B-LD Specifications:
  • Permeate Flow: 5,800 gpd (21.96 m3/d)
  • Salt Rejection: 99.8 % (99.7 % minimum)
  • Type Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 400 ft2 (37.1m2)
  • Feed Spacer: 34 mil (0.864 mm)

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77 °F (25 °C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range

Features

Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113 °F (45 °C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to
  • Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 15 psi

Applications

  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC4+ Membrane https://aquacomponents.sa/product/hydranautics-swc4-membrane/ Thu, 13 Mar 2025 12:38:51 +0000 https://aquacomponents.sa/product/hydranautics-swc4-membrane/ Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models

SWC4+ Specifications:
  • Permeate Flow: 6,500 gpd (24.6 m3/d)
  • Salt Rejection (nominal): 99.8 %
  • Salt Rejection (minimum): 99.7 %
  • Type Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Nominal Membrane Area: 400 ft2

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77 °F (25 °C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range

Features

Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113 °F (45 °C)
  • Feedwater pH Range: 3.0 – 10.0
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to
  • Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

Applications

  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide

]]> Hydranautics SWC6-MAX Membrane https://aquacomponents.sa/product/hydranautics-swc6-max-membrane/ Thu, 13 Mar 2025 12:36:45 +0000 https://aquacomponents.sa/product/hydranautics-swc6-max-membrane/ Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models
SWC6-MAX Specifications
  Low Pressure: High Flow:
Permeate Flow: 6,000 gpd (25 m3/d) 13,200 gpd (50 m3/d)
Salt Rejection: 99.6% (99.4% min) 99.8% (99.7% min)
Boron Rejection (Typical): 83.0% 91.0%
Applied Pressure: 600 psi (4.1 MPa) 800 psi (5.4 MPa)
Configuration: Spiral Wound  
Membrane Polymer: Composite Polyamide  
Membrane Active Area: 440ft2 (40.8m2)  

The stated performance is initial (data taken after 30 minutes of operation), based on the following low pressure conditions:

  • 32,000 ppm NaCl
  • 600 psi (4.1 Mpa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC6-LD Membrane https://aquacomponents.sa/product/hydranautics-swc6-ld-membrane/ Thu, 13 Mar 2025 12:36:45 +0000 https://aquacomponents.sa/product/hydranautics-swc6-ld-membrane/ Advanced membrane technology has produced the SWC6-LD. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Lower fouling for maximum performance. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models
SWC6-LD Specifications:
  Low Pressure: High Flow:
Permeate Flow: 6,000 gpd (22.7 m3/d) 12,000 gpd (45.5 m3/d)
Salt Rejection: 99.6% (99.4% min) 99.8% (99.7% min)
Boron Rejection (Typical): 83.0% 91.0%
Applied Pressure: 600 psi (4.1 MPa) 800 psi (5.4 MPa)
Type Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide
Membrane Active Area: 400ft2 (37.2m2)
Feed Spacer: 34 mil (0.864 mm) with biostatic agent

The stated performance is initial (data taken after 30 minutes of operation), based on the following low pressure conditions:

  • 32,000 ppm NaCl
  • 600 psi (4.1 Mpa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC5 Membrane https://aquacomponents.sa/product/hydranautics-swc5-membrane/ Thu, 13 Mar 2025 12:36:44 +0000 https://aquacomponents.sa/product/hydranautics-swc5-membrane/ SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models
SWC5 Specifications:
  • Permeate Flow: 9,000 gpd (34.1 m3/d)
  • Salt Rejection: 99.8% (Minimum: 99.7%)
  • Boron Rejection (nominal): 92.0%
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Nominal Membrane Area: 400ft2

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • Applied Pressure: 800 psi (5.5 MPa)
  • Operating Temperature: 77°F (25°C)
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • Feedwater pH Range: 3.0 – 10.0
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to
  • Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi
Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC4-MAX Membrane https://aquacomponents.sa/product/hydranautics-swc4-max-membrane/ Thu, 13 Mar 2025 12:36:44 +0000 https://aquacomponents.sa/product/hydranautics-swc4-max-membrane/ Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models
SWC4-MAX Specifications:
  • Permeate Flow: 7,200 gpd (27.3 m3/d)
  • Salt Rejection: 99.8% (99.7% minimum)
  • Boron Rejection (Typical): 93.0%
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 440ft2 (40.8m2)

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC4B Membrane https://aquacomponents.sa/product/hydranautics-swc4b-membrane/ Thu, 13 Mar 2025 12:36:44 +0000 https://aquacomponents.sa/product/hydranautics-swc4b-membrane/ The SWC4B can meet your industrial and commercial seawater desalination standards. Hydranautics membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance. They have the highest boron rejection available. Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes.

Models
SWC4B Specifications:
  • Permeate Flow: 6,500 gpd (24.6m3/d)
  • Salt Rejection: 99.8% (99.7% minimum)
  • Boron Rejection (Typical): 95.0%
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Nominal Membrane Area: 400ft2

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • Feedwater pH Range: 3.0 – 10.0
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. The values may be more conservative for specific projects to ensure the best performance and longest life of the membrane.

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC4B-MAX Membrane https://aquacomponents.sa/product/hydranautics-swc4b-max-membrane/ Thu, 13 Mar 2025 12:36:44 +0000 https://aquacomponents.sa/product/hydranautics-swc4b-max-membrane/ The highest boron rejection available. Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models
SWC4B-MAX Specifications:
  • Permeate Flow: 7,200 gpd (27.3 m3/d)
  • Salt Rejection: 99.8% (99.7% minimum)
  • Boron Rejection (Typical): 95.0%
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 440ft2 (40.8m2)
The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:
  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC4-LD Membrane https://aquacomponents.sa/product/hydranautics-swc4-ld-membrane/ Thu, 13 Mar 2025 12:36:44 +0000 https://aquacomponents.sa/product/hydranautics-swc4-ld-membrane/ SWC4-LD offers unparalleled perfomance for your commercial or industrial water-treatment needs. Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product.

Models
SWC4-LD Specifications:
  • Permeate Flow: 6,500 gpd (24.6 m3/d)
  • Salt Rejection: 99.8% (99.7% minimum)
  • Boron Rejection (Typical): 93.0%
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 400ft2 (37.1m2)
  • Feed Spacer: 34 mil (0.864 mm) with biostatic agent

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]> Hydranautics SWC5-MAX Membrane https://aquacomponents.sa/product/hydranautics-swc5-max-membrane/ Thu, 13 Mar 2025 12:36:44 +0000 https://aquacomponents.sa/product/hydranautics-swc5-max-membrane/ Ten percent additional active surface area and flow and superior boron rejection. The first choice in seawater desalination. Hydranautics has over two decades of experience in desalination and over 1.7 million cubic meters (461 million gallons per day) of seawater treated by their SWC (seawater composite) membranes. SWC seawater desalination membranes are available in high productivity 8-inch and 4-inch elements, all offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance.

Models
SWC5-MAX Specifications:
  • Permeate Flow: 9,900 gpd (37.5 m3/d)
  • Salt Rejection: 99.8% (99.7% minimum)
  • Boron Rejection (Typical): 92.0%
  • Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 440ft2(40.8m2)

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

  • 32,000 ppm NaCl
  • 800 psi (5.5 MPa) Applied Pressure
  • 77°F (25°C) Operating Temperature
  • 10% Permeate Recovery
  • 6.5 – 7.0 pH Range
Features
Standard Operating Limits:
  • Maximum Applied Pressure: 1200 psig (8.27 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113°F (45°C)
  • pH Range, Continuous (Cleaning): 2-11 (1-13)
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to
  • Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi

The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.

Applications
  • Seawater Desalting
  • Broad Offering of Membrane Formulations Designed to Accommodate Varying Levels of Seawater Salinities Worldwide
]]>