Hanna Meters – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:50:37 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4

HANNA Multiparameter https://aquacomponents.sa/product/hanna-multiparameter/ Thu, 13 Mar 2025 12:50:34 +0000 https://aquacomponents.sa/product/hanna-multiparameter/ HANNA Multiparameter is a durable, waterproof meter that consists of ease of use, a strong logging capacity, and at least 12 important water quality variables. This instrument is delivered in a comprehensive system which allows it to begin assessing measurements immediately. THe electrode analysis system notifies the user to possible calibration issues in order to attain results in a timely manner. The features incorporated ensure that the Hanna Multiparameter is effective for all industries, including providing environmental safety.

Models
Specifications
  • SKU: HI2020-01
  • pH Range pH: -2.000 to 16.000, -2.00 to 16.00; ±1000 mV
  • pH Resolution: 0.001 pH, 0.01 pH; 0.1 mV
  • pH Accuracy: (@25°C/77°F) ±0.01 pH, ±0.002 pH; ±0.2 mV
  • pH Calibration: Automatic, up to 3 points (5 points*) calibration, 5 standard (7 standard*) buffers available (1.68*, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45*) and 2 custom buffers*
  • pH Temperature Compensation Automatic: -5 to 100° C (23 to 212° F) (using integral temperature sensor)
  • EC Range: 0.00 to 29.99 µS/cm, 3.00 to 29.99 µS/cm, 30.0 to 299.9 µS/cm, 300 to 2999 µS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm
  • EC Resolution: 0.01 µS/cm, 00.1 µS/cm, 0.01 µS/cm, 0.01 mS/cm, 00.1 mS/cm
  • EC Accuracy: ±1% of reading (±0.05 µS/cm or 1 digit, whichever is greater)
  • EC Calibration: 1 Cell Factor calibration; 6 standards available: 84, 1413 µS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 µS/cm
  • TDS Range: 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution: 0.01 ppm, 0.1 ppm, 1
  • ppm, 0.01 g/L, 0.1 g/L
  • TDS Accuracy: ±1% of reading (±0.03 ppm or 1 digit, whichever is greater)
  • TDS Calibration: through EC calibration
  • EC/TDS Temperature Compensation Automatic: -5 to 100 ºC (23 to 212 ºF) NoTC – can be selected to measure absolute conductivity.
  • Temperature Correction Coefficient: 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC
  • EC to TDS Conversion Factor: 0.40 to 0.80 (default value is 0.50)
  • Salinity Range: 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L*
  • Salinity Resolution: 0.1% NaCl, 0.01 PSU, 0.01 g/L
  • Salinity Accuracy: ±1% of reading
  • Salinity Calibration: 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration)
  • Salinity Temperature Compensation: 0 to 40 g/L (with 1 g/L resolution)
  • Sodium Chloride Range: 0.0 to 400.0% NaCl
  • Sodium Chloride Resolution: 0.1% NaCl
  • Sodium Chloride Accuracy: ±1% of reading
  • Sodium Chloride Calibration: 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration)
  • DO Range: 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)**
  • DO Accuracy: (@25°C/77°F) ±1.5% of reading or ±1 digit
  • DO Resolution: 0.01 ppm (mg/L); 0.1% saturation
  • DO Calibration: One or two points at 0% (HI 7040) and 100% (water saturated air)
  • DO Temperature Compensation: 0.0 to 50.0 °C (32.0 to 122 °F)
  • Salinity Compensation: 0 to 40 g/L, 1 g/L
  • DO Altitude Compensation: -500 to 4000 m (with 100 m resolution)
  • Temperature Range: -20.0 to 120.0 °C, -4.0 to 248.0 °F
  • Temperature Resolution: 0.1 °C, 0.1 °F
  • Temperature Accuracy: ±0.5 °C, ±1.0 °F
  • pH Electrode: HI11310 glass body, refillable pH electrode with temperature sensor
  • EC/TDS Probe: HI763100 EC/temperature probe?
  • DO Probe: HI764080 DO/temperature probe?
  • Power Supply: 5 VDC adapter (included)
  • Environment: 0 to 50°C (32 to 122°F), RH max 95% non-condensing
  • Dimensions: 202 x 140 x 12.7mm (8” x 5.5” x 0.5”) Weight: 250 g (8.82 oz)
  • Ordering Information: HI2020 pH kit includes: HI11310 glass body, refillable pH electrode with temperature sensor, pH 4 buffer solution sachets, pH 7 buffer solution sachets, pH 10 buffer solution sachets, electrode cleaning solution sachets,USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, instruction manual, and quality certificate.
    Special Notes ‡absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ?Available for purchase separately
  • Warranty: 2 years
Features
Product Features
  • Digital Electrodes
  • Sensor Check
  • 3.5 mm Probe Input
  • Wall Mount
  • Cradle and Electrode Holder
  • Two USB Ports
  • Data Logging
  • Two Operating Modes
Applications

HANNA Multiparameter incorporates start-of-the-art features to guarantee fantastic precision and usability.

]]> HANNA pH, Free Chlorine, and Total Chlorine https://aquacomponents.sa/product/hanna-ph-free-chlorine-and-total-chlorine/ Thu, 13 Mar 2025 12:50:32 +0000 https://aquacomponents.sa/product/hanna-ph-free-chlorine-and-total-chlorine/ HANNA pH, Free Chlorine, and Total Chlorine test kits provide terrific transportability, tremendous accuracy, and simplification during operation in an ergonomic design. With the features provided by these instruments, the user’s capabilities in precisely assessing the total chlorine, pH, and free chlorine in the water body is enhanced. There are pre-made reagants also provided that further maximizes testing efficiency. 

Models
Specifications
  • SKU: HI96710
  • Chlorine, Free & Total Range: 0.00 to 5.00 mg/L (ppm)
  • Chlorine, Free & Total Resolution: 0.01 mg/L under 3.50 mg/L; 0.10 mg/L over 3.50 mg/L
  • Chlorine, Free & Total Accuracy: ±0.03 mg/L ±3% of reading
  • Chlorine, Free & Total Method: adaptation of the USEPA method and Standard Method 4500-Cl G
  • pH Range: 6.5 to 8.5 pH
  • pH Resolution: 0.1 pH
  • pH Accuracy: ±0.1 pH
  • pH Method: Phenol Red method
  • Light Source: tungsten lamp
  • Light Detector: silicon photocell
  • Power Supply: 9V battery
  • Auto-off: after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder
  • Environment: 0 to 50°C (32 to 122°F); RH max 95% non-condensing
  • Dimensions: 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
  • Weight: 320g (11.3 oz.)
  • Warranty: 2 years
Features
Product Features
  • CAL Check™
  • GLP
  • Built in timer
  • Indexing indent on meter
  • Cooling Lamp Indicator
  • Error messages
  • Auto-shut off
  • Battery status indicator
Applications
The HANNA pH, Free Chlorine, and Total Chlorine kit is designed for treating water quality issues in regards to pH, total chlorine, and free chlorine.

]]> HANNA Total Hardness https://aquacomponents.sa/product/hanna-total-hardness/ Thu, 13 Mar 2025 12:50:29 +0000 https://aquacomponents.sa/product/hanna-total-hardness/ HANNA Total Hardness is a chemical test kit that asseses the overall hardness concentration through advanced features such as pre-made reagents and equipment that maximizes the analysis. Water hardness is produced from elevated levels of magnesium and calcium from the water, and is the primary cause of scaling and clogging occurring in industrial and commercial establishments. As a result, water treatment plants utilize these test kits to prevent water quality issues.

Models
Specifications
  • Sku: HI97735
  • Hardness, Total Range: Hardness LR: 0 to 250 mg/L; Hardness MR: 200 to 500 mg/L; Hardness HR: 400 to 750 mg/L (ppm)
  • Hardness, Total Resolution: 1 mg/L from 0 to 750 mg/L (ppm)
  • Hardness, Total Accuracy: Hardness LR: ±5 mg/L ±4% of reading; Hardness MR: ±7 mg/L ±3% of reading; Hardness HR: ±10 mg/L ±2% of reading
  • Hardness, Total Method: adaptation of the EPA recommended method 130.1
  • Light Source: light emitting diode
  • Light Detector: silicon photocell
  • Bandpass Filter Bandwidth: 8 nm
  • Bandpass Filter Wavelength Accuracy: ±1.0 nm
  • Logging: 50 readings (auto logging)
  • Power Supply: Alkaline 1.5 V AA (3 pcs.)
  • Battery Life: > 800 measurements (without backlight)
  • Auto-off: After 15 minutes of inactivity (30 minutes before a READ measurement)
  • Environment: 0 to 50 °C (32 to 122 °F); 0 to 100% RH, non-serviceable
  • Dimensions: 142.5 x 102.5 x 50.5 mm (5.6 x 4.0 x 2.0″)
  • Weight: 380 g (13.4 oz.)
  • Warranty: 2 years
Features
Product Features
  • Portable Design Built Better
  • Advanced Optical System
  • Data Logging
  • CAL CheckTM Validation
  • Better Features for Better Testing
Applications
The HANNA Total Hardness kit is the perfect photometer for all water quality testing needs.

]]> HANNA Turbidity and Chlorine https://aquacomponents.sa/product/hanna-turbidity-and-chlorine/ Thu, 13 Mar 2025 12:50:26 +0000 https://aquacomponents.sa/product/hanna-turbidity-and-chlorine/ HANNA Turbidity and Chlorine is a highly precise transportable meter that is used to analyze significant variables in drinking water, such as chlorine and turbidity. By controlling these two parameters, the likelihood of unwanted occurences that reduce water quality such as the growth of pathogens, bad taste and odor, and alterations in the color of water. For this reason, water treatment plants depend heavily on such as instruments to test untreated water supply fron natural sources. 

Models

Specifications
  • SKU: HI93414-01
  • NTU Range: 0.00 to 9.99; 10.0 to 99.9 and 100 to 1000 NTU
  • NTU Resolution: 0.01 NTU from 0.00 to 9.99 NTU;
                           0.1 NTU from 10.0 to 99.9 NTU;
                           1 NTU from 100 to 1000 NTU
  • NTU Accuracy: ±2% of reading plus 0.02 NTU
  • Range Selection: Automatic
  • Turbidity Repeatability: ±1% of reading or 0.02 NTU, whichever is greater
  • Stray Light: < 0.02 NTU
  • Free Clorine Range: 0.00 to 5.00 mg/L
  • Total Chlorine Range: 0.00 to 5.00 mg/L
  • Chlorine Resolution: 0.01 mg/L from 0.00 to 3.50 mg/L; 0.10 above 3.50 mg/L
  • Chlorine Accuracy: ±0.02 mg/L @ 1.00 mg/L
  • Chlorine Detector: Silicon photocell with 525 nm narrow band interference filters
  • Chlorine Method: Adaptation of the USEPA Method 330.5 and Standard Method 4500-Cl G. The reaction between chlorine and DPD reagent causes a pink tint in the sample.
  • Chlorine Standards: 1 mg/L free chlorine, 1 mg/L total chlorine
  • Chlorine Calibration: One-point calibration
  • Turbidity Light Detector: Silicon Photocell
  • Turbidity Method: Ratio Nephelometric Method (90°), ratio of scatter and transmitted ligh
                              Adaptation of the USEPA Method 180.1 and Standard Method 2130 B.
  • Measuring mode: Normal, Average, Continuous.
  • Turbidity Standards: <0.1, 15, 100 and 750 NTU
  • Calibration: Two, three or four-point calibration
  • Light Source: Tungsten filament lamp
  • Lamp Life: greater than 100,000 readings
  • Displa:y 60 x 90mm LCD with backlight
  • LOG Memory: 200 records
  • Serial Interface: RS232 or USB 1.1
  • Environment: 0°C (32°F) to 50°C (122°F); max 95% RH non-condensing
  • Power Supply: 4 x 1.5V AA alkaline batteries or AC adapter
  • Auto Shut-Off: After 15 minutes of non-use
  • Dimensions: 224 x 87 x 77 mm (8.8 x 3.4 x 3.0’’)
  • Weight: 512g (18 oz.)
  • Warranty: 2 years
Features
Product Features
  • Three Measurement Modes
  • Multiple reading mode
  • EPA Compliant
  • Calibration
  • AMCO AEPA-1 Primary Turbidity Standard
  • CAL Check™
  • Fast Tracker™
  • GLP Data
  • Data Logging
  • Data Transfer
  • Backlit Display 
Applications
The HANNA Turbidity and Chlorine meter is one of the popular of it’s kind due to the incorporation of the latest features in the industry. 

]]> Hanna Conductivity/TDS Meters https://aquacomponents.sa/product/hanna-conductivity-tds-meters/ Thu, 13 Mar 2025 12:37:11 +0000 https://aquacomponents.sa/product/hanna-conductivity-tds-meters/ Hanna’s comprehensive line of Conductivity and TDS meters offer dedicated single parameter instruments, as well as multiparameter instruments that support up to eight parameters including salinity and resistivity.

Models
SPecifications
  • SKU: HI 9813-6
  • TDS Range: 0 to 1999 mg/L (ppm)
  • TDS Resolution: 1 mg/L (ppm)
  • TDS Accuracy (@25°C/77°F): ±2% F.S.
  • TDS Conversion Factor: 0.65
  • Temperature Compensation: Automatic from 5 to 50°C (41 to 122°F) with ß =2%/ºC
  • Calibration: Manual, with CAL trimmer
  • Dosing Relay: Maximum 2A (fuse protected), 250 Vac, 30 VDC Contact close when measure: > setpoint
  • Overtime: Adjustable, typically from 5 to approximately 30 minutes
  • Power Supply: Models “-0”: 12 VDC adapter (included) models “-1”: 115/230 VAC; 50/60Hz
  • Dimensions: 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’)
  • Weight: Models “-0”: 200 g (7.1 oz.) models “-1”: 300 g (10.6 oz.)
  • Ordering Information: Supplied with mounting brackets, transparent cover and instruction manual.
  • Recommended Probe: HI7634-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included).
Features
Product Features
  • Water resistant
  • On-screen user guides: Save time with on-screen calibration guides
  • Exclusive CAL CHECK™ feature: Alerts users of calibration status (HI 9813-6 only)
  • BEPS: BEPS (Battery Error Protection System) alerts the user in the event that low battery power could adversely affect readings
  • Switch parameters at the touch of a button
  • Automatic Temperature Compensation: For pH and conductivity
  • Simple calibration Dials located on the front panel makes calibration quick and simple, even for non-technical users
  • Battery % displayed on startup
  • Fast response probe included
Applications
  • Engineering
  • Water Quality Testing
  • Misting
  • Reverse Osmosis
  • Nanofiltration
  • Deionization
  • Cooling Towers

]]>