• Time-tested Duraflow flapper provides frictionless sealing for longer service life
• Fiber-reinforced polymer valve body for superior strength and durability, non-corrosive, and UV-resistant
• Optical sensor for precision cycle positioning
• Fully adjustable 3 or 5 cycle control for efficient and reliable water treatment system
• Continuous service flow rate of 76 GPM with a backwash of 89 GPM
• Backwash capability accommodates softener tanks up to 36″ and filter up to 36″ in diameter
• Designed for single or multiple tank systems
• Super capacitor for keeping time of day during power outage
• Programming stored in memory and will not be lost due to power outages
• History data for valve performance

Water treatment professionals depend on the professional designing of these valves that ensure great reliability and high performance across a variety of applications in the industrial and commercial business sector.

760 Demand

• Simple, economic electronic demand (volumetric)
• Calendar override
• 12-volt operation
• 28-day variable reserve
• High efficiency regeneration sequence
• Automatic capacity calculations
• Operates 255, 263, 268 with one controller

762 Demand

Same features as the 760, plus:

• Fully programmable cycle times
• Salt setting in 1-pound increments
• Optional no-salt detector
• Operates 255, 263, 268, 278, and Magnum IT with one controller

764 Demand

Same features as the 762, plus:

• Multi-tank applications (twin alternating, multitank parallel)
• Control lockout
• Remote regeneration

Valve Connections

• Tank Thread 2-1/2-inches 8, male
• Brine Line 1/4-inch or 3/8-inch NPT, male; air check built into valve
• Distributor Tube 1.050 inches (27 mm) or (diameter) 13/16-inch (20.6 mm)
• Distributor Tube 1-1/8 1/8 inches (29 mm (length) 3 mm) above top of tank
• Drain Line 1/2-inch (manifold dependent)

Flow Rates (Valve Only)

• Service @ 15 psi (1.03 bar) drop 15.5 gpm (3.52 m3/h)
• Backwash @ 25 psi (1.72 bar) drop 6.0 gpm (1.36 m3/h)
• Service Cv = 3.99 (Kv = 3.4)
• Backwash Cv = 1.20 (Kv = 1.0)

• Residential water conditioning applications
• Multiple tank applications

†See owners manual for specific concentrations. ††Valve for use on potable water supply.

Design Specifications/Ratings

• Valve Body Glass-filled thermoplastic – NSF Listed material
• Rubber Components Compounded for cold water – NSF Listed material
• Valve Materials Certification WQA Gold Seal Certified to ORD 0902 and
• NSF/ANSI 44 Rated component for material safety
• Weight (Valve with Control) 5.34 Ibs (2.42 kg)
• Recommended Operating Pressure 20 – 120 psi (1.38 – 8.27 bar)
• Canada 20 – 100 psi (1.38 – 6.89 bar)
• Hydrostatic Test Pressure 300 psi (20.69 bar)
• Water Temperature 35° – 100°F (2° – 38°C)
• Ambient Temperature* 35° – 120°F (2° – 48.9°C)

Features

• 263 is a filter valve, 268 is a softener valve
• Performa means performance – large 1″ ports for high-flow applications
• Valve quickly changes from softener to filter application in three easy steps
• Designed with fewer service parts than any valve of comparable function – longer life, shorter service calls
• Bypass attachment makes maintenance exceptionally fast

Electrical

• Controller Operating Voltage 12 Volt AC (Requires use of Pentair Water®-supplied transformer)
• Input Supply Frequency 50 or 60 Hz (Controller configuration dependent)
• Motor Input Voltage 12 Volt AC
• Controller System Power Consumption 3 Watts average

*Recommend use of outdoor cover for direct sunlight applications.

 

Logix™ Series

Electrical

• Controller Operating Voltage 12 Volt – AC (Requires use of Pentair Water®-supplied transformer)
• Input Supply Frequency 50 or 60 Hz (Controller configuration dependent)
• Motor Input Voltage 12 Volt – AC
• Controller System Power Consumption 3 Watts average

Design Specifications/Ratings

• Valve Body Glass-filled thermoplastic – NSF Listed material
• Rubber Components Compounded for cold water – NSF Listed material
• Valve Materials Certification WQA Gold Seal Certified to ORD0902 and
• NSF/ANSI 44 Rated component for material safety
• Weight (Valve with Control) 5.34 Ibs (2.42 kg)
• Recommended Operating Pressure 20 – 120 psi (1.38 – 8.27 bar)
• Canada 20 – 100 psi (1.38 – 6.89 bar)
• Hydrostatic Test Pressure 300 psi (20.69 bar)
• Water Temperature 35° – 100°F (2° – 38°C)
• Ambient Temperature* 35° – 120°F (2° – 48.9°C)

*Recommend use of outdoor cover for direct sunlight applications.

Standard Features

• Regenerate up to 7 cu. ft. of softener resin
• Performa means performance – large 1″ ports for high-flow applications
• Valve quickly changes from softener to filter application in three easy steps
• Designed with fewer service parts than any valve of comparable function – longer life, shorter service calls
• Bypass attachment makes maintenance exceptionally fast

Options

• Filter or softener control valves
• Fiber-reinforced polymer bypass valve
• Plumbing connections in .75″-1.25″ NPT, BSP, and sweat
• Internal Autotrol turbine
• Variable reserve for increased efficiency
• Auxiliary switch kits
• Timer wall mount kits
• 742– Professional level time clock control with fully programmable cycle times and salt amount.
• 762– Professional level metered control with fully programmable cycle times and salt amount.
• 764– Professional level metered control with fully programmable cycle times and salt amount for multiple tank applications.

 

• Completel electrionic control structure
• External mount kit which can be equipped from up to 40 feet away
• 24/7 backup – battery not required
• Adaptable controller that can be used among all Autotrol® brand valves
• Salt tables and math are not needed due to a self-regulating calculator
• Simple Installation
• Easily cleanable injectors
• 12-volt operation

Water treatment professionals depend on us for dependable, high-performance components for a broad range of residential, commercial, and industrial applications.