AquaMatic Metal Valves – Aqua Components https://aquacomponents.sa Reliable Water Solutions for Saudi Arabia Thu, 13 Mar 2025 12:36:59 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4

AquaMatic V46 Stainless Steel Valve https://aquacomponents.sa/product/aquamatic-v46-stainless-steel-valve/ Thu, 13 Mar 2025 12:36:59 +0000 https://aquacomponents.sa/product/aquamatic-v46-stainless-steel-valve/ The AquaMatic V46 Series Stainless Steel Valves are designed to permit higher flow rates than similarsized diaphragm-operated valves. They are available in 1-, 1-1/2- and 2-inch diameters in threaded or flanged ends. With all stainless steel internals and no internal threads, the V46 is ideally suited for corrosion resistant applications.

Uses for AquaMatic V46 

AquaMatic V46 Valves are constructed of 316 Stainless Steel material. These valves are available in 1-, 1-1/2- and 2-inch sizes, in either threaded or flanged ends. Flanged valves are rated for 150 psi (10 bar) and threaded valves are rated for 250 psi (17 bar). With all stainless steel internals and no internal threads, this series is ideal for corrosion resistant applications.

Models
Operating Specifications:
  • Maximum Working Pressure Threaded Valves: 250 psi (17 bar), Flanged Valves: 150 psi (10.3 bar)
  • Temperature Standard: 150°F (65°C),  Maximum: 250°F (120°C)
  • Pipe Sizes 1-, 1-1/2- and 2-inch threaded (NPT, BSPP, JIS) 1-, 1-1/2- and 2-inch flanged (U.S. or ISO)
  • Standard Materials Valve body, shaft and cap cast 316 stainless steel (CF8M) alloy, all metal internals 316 stainless steel, standard seals Nitrile, diaphragm Nitrile on Polyamide
  • Optional Materials Seals EPDM or FKM elastomers, diaphragm FKM on Polyester
Features
Features:
  • Y-pattern design permits higher flow than other comparably sized diaphragm operated valves
  • Larger diaphragm area compared to seat area permits drip tight closing without any springs
  • Diaphragm acts as an actuator, eliminating the need for electric or pneumatic actuators, which minimizes initial investment and maintenance costs
  • All internal parts are replaceable without removing valve from piping
  • Stainless steel (CF8M) corrosion resistant alloy, all metal internals machined from 316 stainless steel alloy
  • All metal parts are passivated to improve corrosion resistance
  • Reinforced diaphragms are pre-formed and stress relieved to maximize responsiveness and product life
  • Ideal for corrosive applications in paper/pulp, dairy, fuel, and water treatment industries
  • Can be actuated with either air or water as control fluid
Options:
  • Seal and diaphragm materials available
  • Resistant to corrosive atmosphere
  • Limit stop for adjustable flow rate control 
  • Spring assist (open or closed)
  • Position indicator
  • Available in threaded and flanged end configurations
Applications
Typical Applications:
  • Reverse Osmosis Equipment
  • Laundry Equipment
  • Corrosive Liquid Handling
  • Process Water Systems
  • Ozone Generators
  • Steam Sterilization
  • Bottling Plants
  • Chemical Injection
  • Deionization Units
  • Paper and Pulp
  • Condensate Polishers
]]> AquaMatic V42 Metal Valve https://aquacomponents.sa/product/aquamatic-v42-metal-valve/ Thu, 13 Mar 2025 12:36:59 +0000 https://aquacomponents.sa/product/aquamatic-v42-metal-valve/ In addition to the water treatment process systems, AquaMatic Metal Diaphragm Valves are used in a wide variety of applications.

Uses of AquaMatic V42 Metal Valves

AquaMatic V42 Series Valves are constructed of cast iron and designed for air and water applications. A separate control chamber protects the diaphragm from line fluid and extends cycle life. Reinforced diaphragm of Buna N or Viton* materials are pre-formed and stress relieved to maximize responsiveness and product life. The valve is highly serviceable even while in line. A variety of options are available such as spring-assist open, spring-assist closed, flow control limit stop, normally closed, poppet position indicator, and high temperature ethylene propylene or Viton* seals.

Models

Series 420 Valves

Standard valves are normally open. Body and cap are of cast iron. Preformed stress-relieved diaphragm of nitrile (Buna N) on polyamide, and static seals are nitrile, stainless steel and brass internal parts. Pipe sizes are 3/4- to 3-inch threaded (NPT or BSP); 3- through 6-inch flanged drilled in accordance with ASA16.1 class 125, or BSP4504

Features
Features:
  • Large seat opening and high lift-disc for higher flow rates at a lower pressure loss
  • Separate flow and control chambers permit positive closing without springs; and only nominal cost for spring assist opening for low-pressure and self-draining applications
  • Cost-effective solution both in initial cost, as well as lifetime maintenance expenses
  • Separate diaphragm chambers protects the diaphragm from the flow stream, while allowing the valve to be serviced in-line
  • Constructed of cast iron, brass, stainless steel and Nitrile elastomer components, giving an unparalleled service life
  • 3/4-inch through 3-inch threaded (N.P.T. or B.S.P.); 3-inch through 6-inch flanged drilled in accordance with ASA16.1 class 125, or BSP4504
  • Compatible with wide range of line fluids including air or water applications
  • Reinforced diaphragms are pre-formed and stress relieved to maximize responsiveness and product life
  • Can be actuated with either air or water as control fluid
Options:
  • Seal and diaphragm materials available
  • Handles liquid and gases
  • Adaptable to wide variety of control devices
  • Spring assist (open or closed)
  • Position indicator
  • Limit stop for adjustable flow rate control
  • High temperature service
Applications
Typical Applications:
  • Agricultural Irrigation
  • Turf Irrigation
  • Air Dryers
  • Pump Controls
  • Fuel Handling
  • Cooling Towers
  • Level Control Systems
  • Sand Blasting
  • Car Wash Systems
  • Process Water Systems
  • Laundry Equipment
  • Conveyor Systems
  • Air Control Systems
  • Dust Suppression
  • Plastic Molding
  • Machinery
  • Nitrogen Handling
  • Vacuum Control
  • Systems
  • Machine Hydraulic
  • Cooling Control
  • Street Cleaning Vehicles
  • Centrifugal Separators
  • HVAC Systems

]]> AquaMatic VAV https://aquacomponents.sa/product/aquamatic-vav/ Thu, 13 Mar 2025 12:36:59 +0000 https://aquacomponents.sa/product/aquamatic-vav/ The AquaMatic VAV valve is constructed of cast iron and are designed for air applications.

Uses for AquaMatic VAV

The AquaMatic VAV comes designed with a separate control chamber which protects the diaphragm from line fluid and extends cycle life. It has a reinforced diaphragm of Buna N or Viton materials are pre-formed and is stress relieved to maximize responsiveness and product life. The valve is highly serviceable even while in-line. A variety of options are available such as spring-assist open, spring-assist closed, flow control limit stop, normally closed, poppet position indicator, and high temperature EP or Viton seals.

Models
Specifications:

3/4- to 4-inch “Y” pattern diaphragm valve Cast Iron body and cap for air applications.

Features
Features:
  • Engineered for extended cycle life in high-use air applications
  • Large seat opening and high lift-disc for higher flow rates at a lower pressure loss
  • Separate flow and control chambers permit positive closing without springs; and only nominal cost for spring assist opening for low-pressure and self-draining applications
  • Cost-effective solution both in initial cost, as well as lifetime maintenance expenses
  • Separate diaphragm chambers protects the diaphragm from the flow stream, while allowing the valve to be serviced in-line
  • Constructed of cast iron, brass, stainless steel and Nitrile elastomer components, giving an unparalleled service life
  • 3/4-inch through 3-inch threaded (N.P.T. or B.S.P.); 3-inch through 4-inch flanged drilled in accordance with ASA16.1 class 125, or BSP4504
  • Seal and diaphragm materials available
  • Handles liquid and gases
  • Adaptable to wide variety of control devices
  • Spring assist (open or closed)
  • Position indicator
  • Limit stop for adjustable flow rate control
  • High temperature service
Applications

Applications:The AquaMatic VAV is designed for air applications, but works as well in water applications.

]]>